What is a Automatic lid opening heating furnace? Introduction to the advantages and characteristics of the heating furnace

Automatic lid opening heating furnaceIt is a forging heating device using gas as fuel.，is a kind of Automatic lid opening heating furnace manufactured by One-combustion energy saving。

1、Brief introduction of Automatic lid opening heating furnace

Automatic lid opening heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a common Automatic lid opening heating furnace。

Automatic lid opening heating furnace

2、Automatic lid opening heating furnace structure composition

The Automatic lid opening heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Automatic lid opening heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Automatic lid opening heating furnace

3、Automatic lid opening heating furnace real shot picture

The details of the Automatic lid opening heating furnace are displayed in many directions, and the Automatic lid opening heating furnace is beautiful and cost-effective.。

Automatic lid opening heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Automatic lid opening heating furnace field real shot

The following is the live video of Automatic lid opening heating furnace designed and produced by One-combustion energy saving for users, from which we can see the Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes. of One-combustion energy savingAutomatic lid opening heating furnace.。

Automatic lid opening heating furnace

As you can see from the live video.，One-combustion energy saving features include Easy to control, energy saving and environmental protection, energy-efficient, Easy to maintain and Stable and reliable。

5、Introduction of advantages of Automatic lid opening heating furnace

Automatic lid opening heating furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Rapid temperature rise

The Automatic lid opening heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Efficient combustion

The Automatic lid opening heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. easy to operate

The operation interface of the Automatic lid opening heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic lid opening heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Automatic lid opening heating furnace

6、Structural characteristics of Automatic lid opening heating furnace

The Automatic lid opening heating furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Automatic lid opening heating furnace

Automatic lid opening heating furnaceIt can be used for Metal forging heating, Metal tempering, Metal melting and casting, Energy conservation and environmental protection, Metal forging heating, Energy conservation and environmental protection and so on，it is widely used in aerospace, electron, war industry, heat treatment and Machinery manufacturing。