What is a Automatic lid opening forging heating furnace? forging furnace specifications, models, and parameters

Automatic lid opening forging heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is usually composed of furnace chamber, Radiation chamber, ventilation system, ventilation system and Radiation chamber，This productThe overall structural design is simple and novel.，features include Strong adaptability, Stable and reliable, Easy to maintain, Easy to control and Strong adaptability。

1、Brief introduction of Automatic lid opening forging heating furnace

Automatic lid opening forging heating furnaceIt is a forging heating device using gas as fuel.，the product looks atmospheric.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，customizable。

Automatic lid opening forging heating furnace

2、Automatic lid opening forging heating furnace principle

Automatic lid opening forging heating furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Mainly used forMetal melting and casting,Metal tempering,Metal heat treatment,Improve production efficiency andEnergy conservation and environmental protection，It is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，it is an ideal choice for customers to buy Automatic lid opening forging heating furnace。

Automatic lid opening forging heating furnace

3、Automatic lid opening forging heating furnace application

Automatic lid opening forging heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Automatic lid opening forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Automatic lid opening forging heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Automatic lid opening forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Automatic lid opening forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic lid opening forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Automatic lid opening forging heating furnace

4、Structural advantages of Automatic lid opening forging heating furnace

The Automatic lid opening forging heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Automatic lid opening forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Automatic lid opening forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Automatic lid opening forging heating furnace

5、Automatic lid opening forging heating furnace performance advantage

The advantages of Automatic lid opening forging heating furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Intelligent control

The Automatic lid opening forging heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Extend the service life of equipment

The Automatic lid opening forging heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Improve product quality

Because the Automatic lid opening forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Multiple fuel options

Although the Automatic lid opening forging heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Automatic lid opening forging heating furnace

6、Automatic lid opening forging heating furnace working site

On-site aerial photography of Automatic lid opening forging heating furnace。

Automatic lid opening forging heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a kind of high quality and low price Automatic lid opening forging heating furnace。

Automatic lid opening forging heating furnacethe advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。