Introduction to Automatic lid opening forging furnace, Forging furnace advantages, characteristics and principles

Automatic lid opening forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It is a product series that integrates Metal melting and casting, Metal heat treatment, Metal melting and casting, Improve production efficiency and Metal tempering，the main features are Easy to maintain, energy-efficient, Stable and reliable, Strong adaptability and energy-efficient，is a popular Automatic lid opening forging furnace，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。The following is to introduce the Automatic lid opening forging furnace:

1、Brief introduction of Automatic lid opening forging furnace

Automatic lid opening forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used in pharmacy, material, automobile, chemical industry, metallurgy and other industries，multifunctional, with functions such as hardening and tempering, normalizing, temper, anneal and quench，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is developed and improved by One-combustion energy saving。

Automatic lid opening forging furnace

2、Automatic lid opening forging furnace picture

Excellent materials, atmospheric design, fine workmanship, impeccable, trustworthy, all-round high-definition shooting, which is helpful for customers' reference.。

Automatic lid opening forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Automatic lid opening forging furnace performance advantage

Automatic lid opening forging furnaces have the following advantages.

1. Rapid temperature rise

The Automatic lid opening forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Extend the service life of equipment

The Automatic lid opening forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Multiple fuel options

Although the Automatic lid opening forging furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. easy to operate

The operation interface of the Automatic lid opening forging furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Intelligent control

The Automatic lid opening forging furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Automatic lid opening forging furnace

4、Automatic lid opening forging furnace function

Automatic lid opening forging furnaceit has the functions of Casting heating, heat treatment, heat treatment, normalizing and Forging heating，Widely used inMetal tempering,Metal melting and casting,Metal forging heating,Metal heat treatment,Improve production efficiency and so on，energy saving and environmental protection,Easy to maintain,Stable and reliable,Strong adaptability,Easy to control，the main structure includes convection chamber, combustor, ventilation system, ventilation system and recovery of waste heat，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Automatic lid opening forging furnace

5、Introduction of Automatic lid opening forging furnace characteristics

Automatic lid opening forging furnace has the following characteristics

1. Easy to maintain

The structural design of the Automatic lid opening forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Automatic lid opening forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

The combustion system and ventilation system of the Automatic lid opening forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Automatic lid opening forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic lid opening forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Automatic lid opening forging furnace

6、How much is the Automatic lid opening forging furnace?

The Automatic lid opening forging furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Automatic lid opening forging furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Automatic lid opening forging furnace are different.

2. market demand

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Automatic lid opening forging furnace will fluctuate greatly, and the market changes are various.

3. regional difference

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving the address is located at:Jinan, Shandong province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

4. manufacturing cost

Product manufacturers are different, and the cost spent by each manufacturer in producing products is definitely different. The higher the cost of producing products, the higher the price of products set by manufacturers. On the contrary, the Automatic lid opening forging furnace price is low.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Automatic lid opening forging furnace

Automatic lid opening forging furnaceIt has a wide range of uses, and is often used inEnergy conservation and environmental protection,Metal forging heating,Metal heat treatment,Energy conservation and environmental protection,Improve production efficiency and so on，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，is a Automatic lid opening forging furnace。