Introduction to Automatic temperature control heat treatment chain furnace, advantages, characteristics and principles of forging furnace

Automatic temperature control heat treatment chain furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Automatic temperature control heat treatment chain furnace，the product looks atmospheric.，was developed and designed by One-combustion energy saving。The following is to introduce the Automatic temperature control heat treatment chain furnace:

1、Brief introduction of Automatic temperature control heat treatment chain furnace

Automatic temperature control heat treatment chain furnaceIt is a forging heating device using gas as fuel.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It has the functions of Metal melting and casting, Energy conservation and environmental protection, Metal forging heating, Metal heat treatment and Improve production efficiency，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，be loved by our customers.。

Automatic temperature control heat treatment chain furnace

2、Automatic temperature control heat treatment chain furnace characteristics

The Automatic temperature control heat treatment chain furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic temperature control heat treatment chain furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Strong adaptability

The Automatic temperature control heat treatment chain furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Strong adaptability

The Automatic temperature control heat treatment chain furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Efficient heating

The Automatic temperature control heat treatment chain furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to control

The combustion system and ventilation system of the Automatic temperature control heat treatment chain furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Automatic temperature control heat treatment chain furnace

3、Automatic temperature control heat treatment chain furnace function

Automatic temperature control heat treatment chain furnacemultifunctional, with functions such as normalizing, heat treatment, Casting heating, Forging heating and hardening and tempering，it is an ideal choice for customers to buy Automatic temperature control heat treatment chain furnace。

Automatic temperature control heat treatment chain furnace

4、Automatic temperature control heat treatment chain furnace use

The purpose of Automatic temperature control heat treatment chain furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Automatic temperature control heat treatment chain furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Automatic temperature control heat treatment chain furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Automatic temperature control heat treatment chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Energy conservation and environmental protection

The Automatic temperature control heat treatment chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic temperature control heat treatment chain furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Automatic temperature control heat treatment chain furnace

5、Introduction of Automatic temperature control heat treatment chain furnace characteristics

Automatic temperature control heat treatment chain furnace has the following characteristics

1. Easy to maintain

The structural design of the Automatic temperature control heat treatment chain furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Automatic temperature control heat treatment chain furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Stable and reliable

The Automatic temperature control heat treatment chain furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Automatic temperature control heat treatment chain furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Automatic temperature control heat treatment chain furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Automatic temperature control heat treatment chain furnace

6、One-combustion energy saving introduced

One-combustion energy saving is a strong and professional Automatic temperature control heat treatment chain furnace manufacturer, with advanced Automatic temperature control heat treatment chain furnace production technology and rich production experience. It will not only provide users with Automatic temperature control heat treatment chain furnace with energy saving and environmental protection, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

One-combustion energy saving

Automatic temperature control heat treatment chain furnaceit is mainly composed of combustor, recovery of waste heat, Radiation chamber, ventilation system and Radiation chamber，productThe structural design is simple, novel and special.，it has the functions of anneal, temper, hardening and tempering, Casting heating and normalizing，widely used inwar industry,surface treatment,metallurgy,machinery,aerospace and other industries。