Introduction to Automatic temperature regulating heat treatment chain furnace and Forging furnace advantages and features

Automatic temperature regulating heat treatment chain furnaceIt is a forging heating device using gas as fuel.，reliable quality。

1、Brief introduction of Automatic temperature regulating heat treatment chain furnace

Automatic temperature regulating heat treatment chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is widely used in Household necessities, material, heat treatment, metallurgy and aerospace，energy-efficient,Easy to control,Easy to maintain,Easy to maintain,energy saving and environmental protection。

Automatic temperature regulating heat treatment chain furnace

2、Working principle of Automatic temperature regulating heat treatment chain furnace

Automatic temperature regulating heat treatment chain furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Metal melting and casting,Metal tempering,Metal forging heating,Improve production efficiency and so on，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，support customization。

Automatic temperature regulating heat treatment chain furnace

3、Automatic temperature regulating heat treatment chain furnace HD real picture

The Automatic temperature regulating heat treatment chain furnace is designed by One-combustion energy saving with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory Forging furnace more quickly, the following high-definition pictures are provided for reference.。

Automatic temperature regulating heat treatment chain furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of advantages of Automatic temperature regulating heat treatment chain furnace

Automatic temperature regulating heat treatment chain furnaces have the following advantages.

1. Rapid temperature rise

The Automatic temperature regulating heat treatment chain furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Intelligent control

The Automatic temperature regulating heat treatment chain furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. easy to operate

The operation interface of the Automatic temperature regulating heat treatment chain furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Automatic temperature regulating heat treatment chain furnace

5、Structural advantages of Automatic temperature regulating heat treatment chain furnace

The Automatic temperature regulating heat treatment chain furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Radiation chamber

The heat load of the main place for Automatic temperature regulating heat treatment chain furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Automatic temperature regulating heat treatment chain furnace

Automatic temperature regulating heat treatment chain furnaceis a Automatic temperature regulating heat treatment chain furnace，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。