What is a Side door trolley forging furnace? Introduction to the Working Principle of forging furnace

Side door trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，widely used inlight industry,automobile,Household necessities,petroleum,automobile and other industries，reliable quality，low in price。

1、Brief introduction of Side door trolley forging furnace

Side door trolley forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as Forging heating, temper, normalizing, hardening and tempering and Casting heating，the main features are energy-efficient, Easy to control, Easy to maintain, Easy to maintain and Stable and reliable，is a common Side door trolley forging furnace，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

Side door trolley forging furnace

2、Introduction of Side door trolley forging furnace characteristics

Side door trolley forging furnace has the following characteristics

1. Strong adaptability

The Side door trolley forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Stable and reliable

The Side door trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

The combustion system and ventilation system of the Side door trolley forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Side door trolley forging furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Side door trolley forging furnace

3、Side door trolley forging furnace structure

The Side door trolley forging furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Radiation chamber

The heat load of the main place for Side door trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Side door trolley forging furnace

4、Side door trolley forging furnace HD picture

Overview of high-definition pictures,the product looks atmospheric.。

Side door trolley forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、How much is the Side door trolley forging furnace?

The Side door trolley forging furnace price is introduced as follows:

1. company strength

Our factory is a direct selling manufacturer of Side door trolley forging furnace, with independent production and processing facilities, few circulation links and low circulation cost.

2. market demand

In order to build their own brands, some manufacturers deliberately reduce the price of Side door trolley forging furnace. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

3. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

4. Brand strength

At present, there are various brands of Side door trolley forging furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Side door trolley forging furnace are different.

5. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

Side door trolley forging furnace

6、company profile

One-combustion energy saving is a strong and professional Side door trolley forging furnace manufacturer, with advanced Side door trolley forging furnace production technology and rich production experience. It will not only provide users with Side door trolley forging furnace with energy saving and environmental protection, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

One-combustion energy saving

Side door trolley forging furnaceit has the characteristics of energy-efficient, Strong adaptability, Easy to control, energy-efficient and Strong adaptability，the product looks beautiful.。