Introduction to Continuous heat treatment furnace, introduction to heating furnace advantages and characteristics

Continuous heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has been widely used in aerospace, surface treatment, shipping, light industry, chemical industry and other industries，the product looks atmospheric.，is a kind of high quality and low price Continuous heat treatment furnace，the main features are energy-efficient, Stable and reliable, Easy to control, Easy to maintain and energy saving and environmental protection。The following is to introduce the Continuous heat treatment furnace:

1、Brief introduction of Continuous heat treatment furnace

Continuous heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of anneal, temper, heat treatment, hardening and tempering and quench，Commonly used inEnergy conservation and environmental protection,Metal heat treatment,Metal heat treatment,Energy conservation and environmental protection,Metal tempering and so on，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，reliable quality。

Continuous heat treatment furnace

2、Continuous heat treatment furnace use

The purpose of Continuous heat treatment furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Continuous heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Continuous heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Energy conservation and environmental protection

The Continuous heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Continuous heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Continuous heat treatment furnace

3、Continuous heat treatment furnace video detail

Speak directly with facts on the spot。

Continuous heat treatment furnace

As you can see from the live video.，One-combustion energy saving it has the characteristics of Strong adaptability, energy saving and environmental protection, Stable and reliable, Easy to control and Easy to maintain。

4、Continuous heat treatment furnace principle

Continuous heat treatment furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Continuous heat treatment furnace

5、Structural advantages of Continuous heat treatment furnace

The Continuous heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for Continuous heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Continuous heat treatment furnace

6、Continuous heat treatment furnace price

The Continuous heat treatment furnace price is introduced as follows:

1. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

2. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

3. product quality

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

4. Less intermediate links

One-combustion energy saving Continuous heat treatment furnace manufacturer is a professional Continuous heat treatment furnacemanufacturer in Shandong(Province), the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Continuous heat treatment furnace price is also low.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Continuous heat treatment furnace

Continuous heat treatment furnacestructure mainly includes: recovery of waste heat, combustor, convection chamber, ventilation system, Radiation chamber and so on，productThe overall structural design is simple, diverse and beautiful.，the product looks beautiful.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。