What is a Quenching gas trolley furnace? How much is the price of the forging furnace?

Quenching gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has been widely used in surface treatment, war industry, automobile, building materials, petroleum and other industries，multifunctional, with functions such as temper, Forging heating, hardening and tempering, Casting heating and anneal，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Easy to control,energy-efficient,Easy to maintain,energy saving and environmental protection,Easy to control。The following is to introduce the Quenching gas trolley furnace:

1、Brief introduction of Quenching gas trolley furnace

Quenching gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.。

Quenching gas trolley furnace

2、Introduction of advantages of Quenching gas trolley furnace

Quenching gas trolley furnaces have the following advantages.

1. Intelligent control

The Quenching gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Extend the service life of equipment

The Quenching gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Improve product quality

Because the Quenching gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Improve product quality

Because the Quenching gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Quenching gas trolley furnace

3、Quenching gas trolley furnace application

Quenching gas trolley furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Quenching gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Quenching gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Quenching gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Quenching gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Quenching gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Quenching gas trolley furnace

4、Introduction of Quenching gas trolley furnace characteristics

Quenching gas trolley furnace has the following characteristics

1. Stable and reliable

The Quenching gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Quenching gas trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Quenching gas trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to maintain

The structural design of the Quenching gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Quenching gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Quenching gas trolley furnace

5、Working principle of Quenching gas trolley furnace

Quenching gas trolley furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Quenching gas trolley furnace

6、Quenching gas trolley furnace price consultation

The Quenching gas trolley furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Company size

One-combustion energy saving is a self-produced and self-sold Quenching gas trolley furnace, and has rich experience in the production and manufacturing of Quenching gas trolley furnace. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

3. Product configuration difference

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

4. market competition

Market change is one of the factors that affect the price range greatly. Market change is unstable, but there are certain rules to follow. Market change is caused by other factors, such as economic instability, competition among manufacturers and too big difference between supply and demand. These factors are the core reasons that cause the market to fluctuate greatly, and then it will have a bad impact on prices.

5. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Quenching gas trolley furnace

Quenching gas trolley furnacethe product looks beautiful.，It can be used for Energy conservation and environmental protection, Metal forging heating, Improve production efficiency, Energy conservation and environmental protection, Metal heat treatment, Metal forging heating and so on，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。