Introduction to Trolley type high-temperature furnace and Forging furnace advantages and features

Trolley type high-temperature furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，multifunctional, with functions such as Forging heating, normalizing, temper, hardening and tempering and Casting heating。The following is to introduce the Trolley type high-temperature furnace:

1、Brief introduction of Trolley type high-temperature furnace

Trolley type high-temperature furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，widely used inmaterial,automobile,Machinery manufacturing,aerospace,Household necessities and other industries，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a Trolley type high-temperature furnace newly developed by One-combustion energy saving。

Trolley type high-temperature furnace

2、Trolley type high-temperature furnace structure composition

The Trolley type high-temperature furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Trolley type high-temperature furnace

3、Trolley type high-temperature furnace advantage

The advantages of Trolley type high-temperature furnace are as follows:

1. Rapid temperature rise

The Trolley type high-temperature furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Trolley type high-temperature furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Improve product quality

Because the Trolley type high-temperature furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Wide application range

The Trolley type high-temperature furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Intelligent control

The Trolley type high-temperature furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Trolley type high-temperature furnace

4、Trolley type high-temperature furnace explanation video

On-site aerial photography of Trolley type high-temperature furnace。

Trolley type high-temperature furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

5、Trolley type high-temperature furnace characteristics

The Trolley type high-temperature furnace features are as follows:

1. Strong adaptability

The Trolley type high-temperature furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Efficient heating

The Trolley type high-temperature furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Trolley type high-temperature furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Trolley type high-temperature furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Trolley type high-temperature furnace

6、How much is the Trolley type high-temperature furnace?

The Trolley type high-temperature furnace price is introduced as follows:

1. product costs

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Trolley type high-temperature furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

2. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

3. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

4. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Trolley type high-temperature furnace price and service can meet the actual needs of customers.

5. geographical position

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Trolley type high-temperature furnace.

Trolley type high-temperature furnace

Trolley type high-temperature furnacethe main structure includes furnace chamber, convection chamber, ventilation system, Radiation chamber, combustor and so on，Trolley type high-temperature furnaceThe structural design is simple, novel and special.，is a common Trolley type high-temperature furnace，it is widely used inpetroleum,metallurgy,heat treatment,shipping,war industry and other industries。