What is a Split type annealing heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Split type annealing heating furnaceIt is a forging heating device using gas as fuel.，it is widely used in machinery, Household necessities, light industry, shipping, chemical industry and other industries，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，multifunctional, with functions such as Casting heating, quench, Casting heating, Forging heating and normalizing，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

1、Brief introduction of Split type annealing heating furnace

Split type annealing heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a common Split type annealing heating furnace。

Split type annealing heating furnace

2、Functional advantages of Split type annealing heating furnace

Split type annealing heating furnaces have the following advantages.

1. Multiple fuel options

Although the Split type annealing heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Extend the service life of equipment

The Split type annealing heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Efficient combustion

The Split type annealing heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Rapid temperature rise

The Split type annealing heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Intelligent control

The Split type annealing heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Split type annealing heating furnace

3、Split type annealing heating furnace advantage

The advantages of Split type annealing heating furnace are as follows:

1. Improve product quality

Because the Split type annealing heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Wide application range

The Split type annealing heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Split type annealing heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Split type annealing heating furnace

4、Working principle of Split type annealing heating furnace

Split type annealing heating furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it can be used in pharmacy, light industry, aerospace, material, chemical industry and other industries。

Split type annealing heating furnace

5、Split type annealing heating furnace use

The purpose of Split type annealing heating furnace is introduced as follows:

1. Metal forging heating

The Split type annealing heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Split type annealing heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Split type annealing heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type annealing heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Split type annealing heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Split type annealing heating furnace

6、Brief introduction of Split type annealing heating furnace

Split type annealing heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.，It has the functions of Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Metal forging heating and Improve production efficiency。

Split type annealing heating furnace

Split type annealing heating furnaceit is widely used in war industry, shipping, electron, heat treatment and building materials，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。