What is a Metal gas trolley furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Metal gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。The following is to introduce the Metal gas trolley furnace:

1、Brief introduction of Metal gas trolley furnace

Metal gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of Forging heating, anneal, quench, temper and Casting heating，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，it is mainly composed of ventilation system, ventilation system, convection chamber, Radiation chamber and furnace chamber，it is an ideal choice for customers to buy Metal gas trolley furnace。

Metal gas trolley furnace

2、Metal gas trolley furnace advantage

The advantages of Metal gas trolley furnace are as follows:

1. Wide application range

The Metal gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Improve product quality

Because the Metal gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Uniform heating

The Metal gas trolley furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Metal gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

Metal gas trolley furnace

3、Metal gas trolley furnace use

The purpose of Metal gas trolley furnace is introduced as follows:

1. Energy conservation and environmental protection

The Metal gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Metal gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Metal gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Metal gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Metal gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Metal gas trolley furnace

4、Metal gas trolley furnace display

Metal gas trolley furnace have various specifications and models, which can meet the diverse needs of users. The following are high-definition real pictures, which are exquisite in workmanship and trustworthy.。

Metal gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Working principle of Metal gas trolley furnace

Metal gas trolley furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of normalizing, heat treatment, hardening and tempering, hardening and tempering and anneal，be loved by our customers.。

Metal gas trolley furnace

6、Metal gas trolley furnace function

Metal gas trolley furnacemultifunctional, with functions such as quench, heat treatment, temper, normalizing and Casting heating，the product looks atmospheric.，generally, it is composed of Radiation chamber, furnace chamber, ventilation system, convection chamber, ventilation system and other major components，Metal gas trolley furnaceThe structure is novel, special, advanced, reasonable and scientific.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is a popular Metal gas trolley furnace。

Metal gas trolley furnace

Metal gas trolley furnacethe product looks atmospheric.，The overall structural design is relatively simple and compact.，it is mainly composed of recovery of waste heat, combustor, convection chamber, ventilation system and ventilation system，is a Metal gas trolley furnace。