What is a Split type annealing heat treatment furnace? Introduction to the Working Principle of Forging furnace

Split type annealing heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Cheap and high quality。The following is to introduce the Split type annealing heat treatment furnace:

1、Brief introduction of Split type annealing heat treatment furnace

Split type annealing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Simple structure and reliable operation.，it mainly includes ventilation system, Radiation chamber, recovery of waste heat, recovery of waste heat and ventilation system，is designed by One-combustion energy saving with advanced technology。

Split type annealing heat treatment furnace

2、Split type annealing heat treatment furnace characteristics

The Split type annealing heat treatment furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Split type annealing heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Split type annealing heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Split type annealing heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Split type annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Split type annealing heat treatment furnace

3、Structural characteristics of Split type annealing heat treatment furnace

The Split type annealing heat treatment furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Split type annealing heat treatment furnace

4、Split type annealing heat treatment furnace HD picture real shot

Provide high-definition Split type annealing heat treatment furnace real shot, a variety of specifications and models for customers to visit.。

Split type annealing heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Split type annealing heat treatment furnace field real shot

On-site aerial photography of Split type annealing heat treatment furnace。

Split type annealing heat treatment furnace

As you can see from the live video.，One-combustion energy saving Simple structure and advanced technology.，it has the structure of Radiation chamber, combustor, ventilation system, convection chamber and furnace chamber。

6、Split type annealing heat treatment furnace real beat

Split type annealing heat treatment furnace HD real shot, a variety of specifications and models display, for our customers to choose at will.。

Split type annealing heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Split type annealing heat treatment furnacethe product looks atmospheric.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main features are energy saving and environmental protection, Easy to maintain, Easy to control, Strong adaptability and energy-efficient。