Introduction to Decarbonization annealing industrial furnace, introduction to forging furnace advantages and characteristics

Decarbonization annealing industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as Casting heating, Forging heating, temper, quench and heat treatment，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used in Household necessities, surface treatment, building materials, electron and petroleum，It has the functions of Metal tempering, Metal melting and casting, Energy conservation and environmental protection, Metal heat treatment and Metal heat treatment。

1、Brief introduction of Decarbonization annealing industrial furnace

Decarbonization annealing industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks atmospheric.，the main features are energy saving and environmental protection, energy-efficient, energy saving and environmental protection, Easy to maintain and Stable and reliable，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，is developed and improved by One-combustion energy saving。

Decarbonization annealing industrial furnace

2、Decarbonization annealing industrial furnace function

Decarbonization annealing industrial furnaceit has the functions of anneal, hardening and tempering, quench, anneal and normalizing，is a common Decarbonization annealing industrial furnace，The price is more affordable，reliable quality。

Decarbonization annealing industrial furnace

3、Decarbonization annealing industrial furnace work site real shot

One-combustion energy saving Decarbonization annealing industrial furnacethe product looks beautiful., the following is a panoramic shot of the Decarbonization annealing industrial furnace for your reference.。

Decarbonization annealing industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Working principle of Decarbonization annealing industrial furnace

Decarbonization annealing industrial furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It has a wide range of uses, including Metal tempering, Metal melting and casting, Improve production efficiency, Energy conservation and environmental protection and Metal forging heating，the product looks atmospheric.。

Decarbonization annealing industrial furnace

5、Decarbonization annealing industrial furnace use

The purpose of Decarbonization annealing industrial furnace is introduced as follows:

1. Energy conservation and environmental protection

The Decarbonization annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Decarbonization annealing industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Decarbonization annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Decarbonization annealing industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Decarbonization annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Decarbonization annealing industrial furnace

6、One-combustion energy saving company discount

Decarbonization annealing industrial furnace is a new type of forging furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for aerospace and other industries. Now consult One-combustion energy savingProduction and processing的Decarbonization annealing industrial furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Decarbonization annealing industrial furnaceUniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。