Introduction to Decarbonization annealing furnace and heating furnace advantages and features

Decarbonization annealing furnaceIt is a forging heating device using gas as fuel.，it has the structure of Radiation chamber, combustor, ventilation system, furnace chamber and convection chamber，This Decarbonization annealing furnaceThe overall structural design is simple and novel.。The following is to introduce the Decarbonization annealing furnace:

1、Brief introduction of Decarbonization annealing furnace

Decarbonization annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Decarbonization annealing furnace

2、Decarbonization annealing furnace use

The purpose of Decarbonization annealing furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Decarbonization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Decarbonization annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Improve production efficiency

The Decarbonization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Decarbonization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Decarbonization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Decarbonization annealing furnace

3、Introduction of Decarbonization annealing furnace characteristics

Decarbonization annealing furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Decarbonization annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Stable and reliable

The Decarbonization annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to maintain

The structural design of the Decarbonization annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

The combustion system and ventilation system of the Decarbonization annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Decarbonization annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Decarbonization annealing furnace

4、Decarbonization annealing furnace advantage

The advantages of Decarbonization annealing furnace are as follows:

1. Multiple fuel options

Although the Decarbonization annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Intelligent control

The Decarbonization annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Wide application range

The Decarbonization annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Rapid temperature rise

The Decarbonization annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Decarbonization annealing furnace

5、Decarbonization annealing furnace characteristics

The Decarbonization annealing furnace features are as follows:

1. Efficient heating

The Decarbonization annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Decarbonization annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Decarbonization annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Stable and reliable

The Decarbonization annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Decarbonization annealing furnace

6、Decarbonization annealing furnace quotation

The Decarbonization annealing furnace price is introduced as follows:

1. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

2. Self quality

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

3. market demand

The degree of market competition is also an important factor affecting the price change of products. In order to improve the purchasing power of customers, manufacturers will take preferential measures and appropriately reduce prices.

4. model

The same type of equipment, with different models and sizes, has different investment costs, so the quotations to customers are naturally different. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

5. Company size

Our factory is a direct selling manufacturer of Decarbonization annealing furnace, with independent production and processing facilities, few circulation links and low circulation cost.

Decarbonization annealing furnace

Decarbonization annealing furnaceis a kind of high quality and low price Decarbonization annealing furnace，the product looks beautiful.，it has the functions of quench, normalizing, anneal, heat treatment and normalizing。