Introduction and advantages of Fully automatic industrial furnace

Fully automatic industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is developed and improved by One-combustion energy saving。

1、Brief introduction of Fully automatic industrial furnace

Fully automatic industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is widely used in electron, metallurgy, surface treatment, material and machinery，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Fully automatic industrial furnace

2、Introduction of Fully automatic industrial furnace characteristics

Fully automatic industrial furnace has the following characteristics

1. Easy to maintain

The structural design of the Fully automatic industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Fully automatic industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Fully automatic industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Fully automatic industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Fully automatic industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Fully automatic industrial furnace

3、Fully automatic industrial furnace function

Fully automatic industrial furnaceit has the functions of Casting heating, normalizing, quench, anneal and Forging heating，customizable。

Fully automatic industrial furnace

4、Fully automatic industrial furnace advantage

The advantages of Fully automatic industrial furnace are as follows:

1. easy to operate

The operation interface of the Fully automatic industrial furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Rapid temperature rise

The Fully automatic industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Efficient combustion

The Fully automatic industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Uniform heating

The Fully automatic industrial furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Extend the service life of equipment

The Fully automatic industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Fully automatic industrial furnace

5、Fully automatic industrial furnace price concessions

The Fully automatic industrial furnace price is introduced as follows:

1. mass discrepancy

The service life of products with excellent quality will be longer, and at the same time, such products are very high in science and technology, which will create higher benefits for customers and make the price generally high, which is the main reason for the high price.

2. market supply and demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Fully automatic industrial furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

3. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Fully automatic industrial furnace has a higher cost performance.

4. Manufacturer's sales model

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

5. Low cost of raw materials

Product manufacturers are different, and the cost spent by each manufacturer in producing products is definitely different. The higher the cost of producing products, the higher the price of products set by manufacturers. On the contrary, the Fully automatic industrial furnace price is low.

Fully automatic industrial furnace

6、One-combustion energy saving delivery site

The following is the live video of Fully automatic industrial furnace designed and produced by One-combustion energy saving for users, from which we can see the Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency. of Fully automatic industrial furnace.。

Fully automatic industrial furnace

As you can see from the live video.One-combustion energy saving It is a forging heating device using gas as fuel.。

Fully automatic industrial furnacegenerally, it is composed of convection chamber, recovery of waste heat, ventilation system, furnace chamber, ventilation system and other major components，Fully automatic industrial furnaceThe structure is novel, special, advanced, reasonable and scientific.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。