What is a Stick type mold heating furnace? Introduction to the advantages and characteristics of forging furnace functions

Stick type mold heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Easy to maintain,Strong adaptability,energy-efficient,Easy to control,Stable and reliable，the product looks beautiful.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，was developed and designed by One-combustion energy saving。

1、Brief introduction of Stick type mold heating furnace

Stick type mold heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，be of high quality，low in price。

Stick type mold heating furnace

2、Working principle of Stick type mold heating furnace

Stick type mold heating furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is an advanced Stick type mold heating furnace developed by our company in combination with the actual situation of the industry。

Stick type mold heating furnace

3、Stick type mold heating furnace characteristics

The Stick type mold heating furnace features are as follows:

1. Efficient heating

The Stick type mold heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Strong adaptability

The Stick type mold heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Stick type mold heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Stick type mold heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Stick type mold heating furnace

4、Stick type mold heating furnace characteristics

The Stick type mold heating furnace features are as follows:

1. Efficient heating

The Stick type mold heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Strong adaptability

The Stick type mold heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Stick type mold heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Stable and reliable

The Stick type mold heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

The combustion system and ventilation system of the Stick type mold heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Stick type mold heating furnace

5、Structural characteristics of Stick type mold heating furnace

The Stick type mold heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Stick type mold heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Stick type mold heating furnace

6、How much is the Stick type mold heating furnace?

The Stick type mold heating furnace price is introduced as follows:

1. regional difference

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Stick type mold heating furnace.

2. quality factor

Usually, the price of good quality products will be higher, because the product has higher technical content and more costs in raw materials and labor, but the performance of such products is higher and the profits will be higher. On the contrary, the price of ordinary quality products will be relatively lower, but the benefits will be correspondingly poor.

3. product model

The same equipment, even with different models and different configurations, has different investment costs, so the price will be different.

4. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Stick type mold heating furnace price and service can meet the actual needs of customers.

5. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

Stick type mold heating furnace

Stick type mold heating furnacethe main structure includes Radiation chamber, ventilation system, ventilation system, furnace chamber, convection chamber and so on，Stick type mold heating furnaceThe overall structural design is relatively simple，it can be used in metallurgy, surface treatment, light industry, aerospace, petroleum and other industries，It has the functions of Metal tempering, Metal forging heating, Improve production efficiency, Metal forging heating and Energy conservation and environmental protection。