Introduction to Automated well type annealing furnace and forging furnace advantages and features

Automated well type annealing furnaceIt is a forging heating device using gas as fuel.，widely used in Machinery manufacturing, surface treatment, chemical industry, petroleum, heat treatment and other fields，is a common Automated well type annealing furnace。The following is to introduce the Automated well type annealing furnace:

1、Brief introduction of Automated well type annealing furnace

Automated well type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is carefully developed by One-combustion energy saving combined with advanced technology。

Automated well type annealing furnace

2、Structural characteristics of Automated well type annealing furnace

The Automated well type annealing furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Radiation chamber

The heat load of the main place for Automated well type annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. furnace chamber

A space for holding metallic materials for heating.

Automated well type annealing furnace

3、Automated well type annealing furnace working site

On-site aerial photography of Automated well type annealing furnace。

Automated well type annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as hardening and tempering, anneal, quench, Forging heating and hardening and tempering。

4、Introduction of Automated well type annealing furnace characteristics

Automated well type annealing furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Automated well type annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Automated well type annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Automated well type annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Stable and reliable

The Automated well type annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Automated well type annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Automated well type annealing furnace

5、Automated well type annealing furnace characteristics

The Automated well type annealing furnace features are as follows:

1. Easy to maintain

The structural design of the Automated well type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automated well type annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Efficient heating

The Automated well type annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Stable and reliable

The Automated well type annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Automated well type annealing furnace

6、Automated well type annealing furnace advantage

The advantages of Automated well type annealing furnace are as follows:

1. Rapid temperature rise

The Automated well type annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Automated well type annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automated well type annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Intelligent control

The Automated well type annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Automated well type annealing furnace

Automated well type annealing furnaceis a popular Automated well type annealing furnace，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the main structure includes recovery of waste heat, ventilation system, ventilation system, convection chamber and furnace chamber。