Introduction to Low temperature catalyst for flue gas denitrification outside the furnace, introduction to SCR denitration function advantages and characteristics

Low temperature catalyst for flue gas denitrification outside the furnaceit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，it has been widely used in coal-fired power station, iron and steel plant, cement plant, metallurgy, iron and steel plant and other industries，the main features are Stable operation, Good selectivity, Less secondary pollution, Efficient denitration and Environmental protection and pollution-free，multifunctional, with functions such as Promote sustainable development, environmental protection, Improve energy efficiency, Improve working conditions and Promote sustainable development，the product looks atmospheric.。

1、Brief introduction of Low temperature catalyst for flue gas denitrification outside the furnace

Low temperature catalyst for flue gas denitrification outside the furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.，at work,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalyst for flue gas denitrification outside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalyst for flue gas denitrification outside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalyst for flue gas denitrification outside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalyst for flue gas denitrification outside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalyst for flue gas denitrification outside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalyst for flue gas denitrification outside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，Simple structure and reliable operation.，it is usually composed of Catalyst reactor, Temperature control and monitoring system, Catalyst supply system, Flue gas mixing and distribution system and control system，is a kind of Low temperature catalyst for flue gas denitrification outside the furnace manufactured by One-combustion energy saving。

Low temperature catalyst for flue gas denitrification outside the furnace

2、Structural advantages of Low temperature catalyst for flue gas denitrification outside the furnace

The Low temperature catalyst for flue gas denitrification outside the furnace has the following structure

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. control system

The whole Low temperature catalyst for flue gas denitrification outside the furnace is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

3. Reactor

It is the core component of Low temperature catalyst for flue gas denitrification outside the furnace technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

4. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

5. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

Low temperature catalyst for flue gas denitrification outside the furnace

3、Video analysis of Low temperature catalyst for flue gas denitrification outside the furnace

On-site aerial photography of Low temperature catalyst for flue gas denitrification outside the furnace。

Low temperature catalyst for flue gas denitrification outside the furnace

As you can see from the live video.，One-combustion energy saving Strong adaptability,Stable operation,Less secondary pollution,Environmental protection and pollution-free,Environment friendly。

4、Functional advantages of Low temperature catalyst for flue gas denitrification outside the furnace

The advantages of Low temperature catalyst for flue gas denitrification outside the furnace are as follows:

1. Intelligent control and convenience of operation

The Low temperature catalyst for flue gas denitrification outside the furnace has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Low temperature catalyst for flue gas denitrification outside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

2. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Low temperature catalyst for flue gas denitrification outside the furnace technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalyst for flue gas denitrification outside the furnace technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

3. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalyst for flue gas denitrification outside the furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

4. Wide applicability

Low temperature catalyst for flue gas denitrification outside the furnace technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalyst for flue gas denitrification outside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

5. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalyst for flue gas denitrification outside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalyst for flue gas denitrification outside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

Low temperature catalyst for flue gas denitrification outside the furnace

5、Low temperature catalyst for flue gas denitrification outside the furnace price

The Low temperature catalyst for flue gas denitrification outside the furnace price is introduced as follows:

1. Sales model

One-combustion energy saving Low temperature catalyst for flue gas denitrification outside the furnace manufacturer is a large Low temperature catalyst for flue gas denitrification outside the furnace manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Low temperature catalyst for flue gas denitrification outside the furnace price is also low.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Low temperature catalyst for flue gas denitrification outside the furnace have more or less differences in price.

3. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Low temperature catalyst for flue gas denitrification outside the furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Low temperature catalyst for flue gas denitrification outside the furnace price can meet the purchasing needs of customers.

4. Parameter size

The same product, different specifications and models, the performance of the product is different, therefore, manufacturers need different costs in producing and manufacturing products, so the prices of different specifications and models are different, and customers should give priority to suitability when purchasing.

5. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

Low temperature catalyst for flue gas denitrification outside the furnace

6、High-definition map of One-combustion energy saving workshop

The finished products of the Low temperature catalyst for flue gas denitrification outside the furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Low temperature catalyst for flue gas denitrification outside the furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Low temperature catalyst for flue gas denitrification outside the furnaceis a popular Low temperature catalyst for flue gas denitrification outside the furnace，in the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.。