Introduction to Regenerative burner chain furnace, advantages, characteristics and principles of Forging furnace

Regenerative burner chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。

1、Brief introduction of Regenerative burner chain furnace

Regenerative burner chain furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，low in price，modern technology。

Regenerative burner chain furnace

2、Regenerative burner chain furnace use

The purpose of Regenerative burner chain furnace is introduced as follows:

1. Metal forging heating

The Regenerative burner chain furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Regenerative burner chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Regenerative burner chain furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Regenerative burner chain furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner chain furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Regenerative burner chain furnace

3、Regenerative burner chain furnace advantage

The advantages of Regenerative burner chain furnace are as follows:

1. Improve product quality

Because the Regenerative burner chain furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Wide application range

The Regenerative burner chain furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Uniform heating

The Regenerative burner chain furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Multiple fuel options

Although the Regenerative burner chain furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Extend the service life of equipment

The Regenerative burner chain furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Regenerative burner chain furnace

4、Working principle of Regenerative burner chain furnace

Regenerative burner chain furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it can be used in light industry, material, heat treatment, electron, metallurgy and other industries，multifunctional, with functions such as hardening and tempering, normalizing, quench, heat treatment and Casting heating，customizable。

Regenerative burner chain furnace

5、Regenerative burner chain furnace function

Regenerative burner chain furnaceit has the functions of Forging heating, normalizing, Forging heating, temper and heat treatment，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is based on One-combustion energy saving is a Regenerative burner chain furnace newly developed by One-combustion energy saving。

Regenerative burner chain furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving, as one of the professional and powerful Regenerative burner chain furnace manufacturers in Jinan, Shandong province, produces Regenerative burner chain furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Regenerative burner chain furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，usually used in machinery, Household necessities, surface treatment, aerospace, shipping and other fields。