Introduction to Low temperature absorption SCR flue gas denitrification system, how much is the price of the SCR denitration?

Low temperature absorption SCR flue gas denitrification systemis an efficient, stable and environment-friendly flue gas denitrification technology.，Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，usually used in iron and steel plant, building materials, cement plant, Gas power plant, coal-fired power station and other fields，Efficient denitration,Economically feasible,Environmental protection and pollution-free,Strong adaptability,Strong adaptability，was developed and designed by One-combustion energy saving。The following is to introduce the Low temperature absorption SCR flue gas denitrification system:

1、Brief introduction of Low temperature absorption SCR flue gas denitrification system

Low temperature absorption SCR flue gas denitrification systemis an efficient, stable and environment-friendly flue gas denitrification technology.。

Low temperature absorption SCR flue gas denitrification system

2、Low temperature absorption SCR flue gas denitrification system advantage

The advantages of Low temperature absorption SCR flue gas denitrification system are as follows:

1. Intelligent control and convenience of operation

The Low temperature absorption SCR flue gas denitrification system has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Low temperature absorption SCR flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

2. Environmental friendliness

The by-products produced by Low temperature absorption SCR flue gas denitrification system technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature absorption SCR flue gas denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

3. Wide applicability

Low temperature absorption SCR flue gas denitrification system technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature absorption SCR flue gas denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

4. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature absorption SCR flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature absorption SCR flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

5. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Low temperature absorption SCR flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

Low temperature absorption SCR flue gas denitrification system

3、Introduction of Low temperature absorption SCR flue gas denitrification system characteristics

Low temperature absorption SCR flue gas denitrification system has the following characteristics

1. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

2. Environmental protection

The final products of Low temperature absorption SCR flue gas denitrification system technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

3. Mature technology

After years of development and application, Low temperature absorption SCR flue gas denitrification system technology is very mature and has a wide application prospect.

4. Stable operation and stability

The Low temperature absorption SCR flue gas denitrification system technology runs stably and can meet the requirements of flue gas treatment under different working conditions.

5. Strong adaptability

Low temperature absorption SCR flue gas denitrification system technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

Low temperature absorption SCR flue gas denitrification system

4、Low temperature absorption SCR flue gas denitrification system video

You can buy Low temperature absorption SCR flue gas denitrification system according to your needs and show you product videos.。

Low temperature absorption SCR flue gas denitrification system

As you can see from the live video.，One-combustion energy saving the main features are Efficient denitration, Mature and stable technology, Economically feasible, Stable operation and Less secondary pollution。

5、Low temperature absorption SCR flue gas denitrification system function

Low temperature absorption SCR flue gas denitrification systemit has the functions of environmental protection, Improve working conditions, environmental protection, Improve energy efficiency and Promote sustainable development。

Low temperature absorption SCR flue gas denitrification system

6、Low temperature absorption SCR flue gas denitrification system principle

Low temperature absorption SCR flue gas denitrification systemin the course of work,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，be of high quality，The price is more affordable。

Low temperature absorption SCR flue gas denitrification system

Low temperature absorption SCR flue gas denitrification systemmultifunctional, with functions such as Improve working conditions, environmental protection, Improve working conditions, Improve energy efficiency and Promote sustainable development，it has the structure of Flue gas mixing and distribution system, Catalyst supply system, Catalyst reactor, Temperature control and monitoring system and control system，is a Low temperature absorption SCR flue gas denitrification system。