What is a Titanium alloy heat treatment trolley forging furnace? Introduction to the principle of forging furnace structure

Titanium alloy heat treatment trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。The following is to introduce the Titanium alloy heat treatment trolley forging furnace:

1、Brief introduction of Titanium alloy heat treatment trolley forging furnace

Titanium alloy heat treatment trolley forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Titanium alloy heat treatment trolley forging furnace，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，widely used in material, aerospace, chemical industry, machinery, war industry and other fields，The price is low and affordable。

Titanium alloy heat treatment trolley forging furnace

2、Titanium alloy heat treatment trolley forging furnace function

Titanium alloy heat treatment trolley forging furnaceit has the functions of normalizing, temper, hardening and tempering, quench and anneal，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of convection chamber, furnace chamber, Radiation chamber, ventilation system and combustor。

Titanium alloy heat treatment trolley forging furnace

3、Titanium alloy heat treatment trolley forging furnace advantage

The advantages of Titanium alloy heat treatment trolley forging furnace are as follows:

1. easy to operate

The operation interface of the Titanium alloy heat treatment trolley forging furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Efficient combustion

The Titanium alloy heat treatment trolley forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Wide application range

The Titanium alloy heat treatment trolley forging furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Improve product quality

Because the Titanium alloy heat treatment trolley forging furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Multiple fuel options

Although the Titanium alloy heat treatment trolley forging furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Titanium alloy heat treatment trolley forging furnace

4、Titanium alloy heat treatment trolley forging furnace characteristics

The Titanium alloy heat treatment trolley forging furnace features are as follows:

1. Efficient heating

The Titanium alloy heat treatment trolley forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Titanium alloy heat treatment trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Titanium alloy heat treatment trolley forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Strong adaptability

The Titanium alloy heat treatment trolley forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The Titanium alloy heat treatment trolley forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Titanium alloy heat treatment trolley forging furnace

5、Titanium alloy heat treatment trolley forging furnace use

The purpose of Titanium alloy heat treatment trolley forging furnace is introduced as follows:

1. Metal forging heating

The Titanium alloy heat treatment trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Titanium alloy heat treatment trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Titanium alloy heat treatment trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Titanium alloy heat treatment trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Titanium alloy heat treatment trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Titanium alloy heat treatment trolley forging furnace

6、Titanium alloy heat treatment trolley forging furnace structure

The Titanium alloy heat treatment trolley forging furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Titanium alloy heat treatment trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Titanium alloy heat treatment trolley forging furnace

Titanium alloy heat treatment trolley forging furnacemultifunctional, with functions such as Casting heating, hardening and tempering, Forging heating, anneal and normalizing，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。