Introduction to Anchor chain annealing furnace, forging furnace specifications, model parameters

Anchor chain annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is an ideal choice for customers to buy Anchor chain annealing furnace。

1、Brief introduction of Anchor chain annealing furnace

Anchor chain annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The structural design is more advanced and reasonable.，it is mainly composed of ventilation system, Radiation chamber, convection chamber, Radiation chamber and ventilation system，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

Anchor chain annealing furnace

2、Anchor chain annealing furnace field real shot

Anchor chain annealing furnace have various specifications and models, which can meet the diverse needs of users. The following are high-definition real pictures, which are exquisite in workmanship and trustworthy.。

Anchor chain annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Anchor chain annealing furnace video

You can buy Anchor chain annealing furnace according to your needs and show you Anchor chain annealing furnace videos.。

Anchor chain annealing furnace

As you can see from the live video.，One-combustion energy saving the main structure includes combustor, convection chamber, ventilation system, furnace chamber, recovery of waste heat and so on。

4、Anchor chain annealing furnace application

Anchor chain annealing furnaces have the following purposes.

1. Improve production efficiency

The Anchor chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Anchor chain annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Anchor chain annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Anchor chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Anchor chain annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Anchor chain annealing furnace

5、Anchor chain annealing furnace function

Anchor chain annealing furnacemultifunctional, with functions such as normalizing, heat treatment, Casting heating, hardening and tempering and quench，was developed and designed by One-combustion energy saving。

Anchor chain annealing furnace

6、How much is the Anchor chain annealing furnace?

The Anchor chain annealing furnace price is introduced as follows:

1. region

One-combustion energy savingJinan, the transportation is convenient, and the corresponding cost of transporting Anchor chain annealing furnace is low, which reduces the cost of selling Anchor chain annealing furnace by manufacturers, and the price will also decrease.

2. Proper management mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Anchor chain annealing furnace is low.

3. Product configuration difference

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

4. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

5. mass discrepancy

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

Anchor chain annealing furnace

Anchor chain annealing furnacethe product looks beautiful.，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。