What is a Gas trolley furnace in heat treatment workshop? forging furnace specifications, models, and parameters

Gas trolley furnace in heat treatment workshopIt is an efficient, energy-saving and environment-friendly metal heating device.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the main features are Easy to maintain, energy saving and environmental protection, Stable and reliable, Easy to control and Strong adaptability，The structural design is simple, novel and special.，Structure consists of Radiation chamber, ventilation system, furnace chamber, Radiation chamber, combustor and so on，it has the characteristics of energy-efficient, Easy to control, energy saving and environmental protection, Stable and reliable and Easy to maintain。The following is to introduce the Gas trolley furnace in heat treatment workshop:

1、Brief introduction of Gas trolley furnace in heat treatment workshop

Gas trolley furnace in heat treatment workshopIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

Gas trolley furnace in heat treatment workshop

2、Gas trolley furnace in heat treatment workshop structure composition

The Gas trolley furnace in heat treatment workshop has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Gas trolley furnace in heat treatment workshop heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Gas trolley furnace in heat treatment workshop

3、Gas trolley furnace in heat treatment workshop customer scene picture

High-definition pictures of reliable Gas trolley furnace in heat treatment workshop at a glance。

Gas trolley furnace in heat treatment workshop

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of advantages of Gas trolley furnace in heat treatment workshop

The advantages of Gas trolley furnace in heat treatment workshop are as follows:

1. easy to operate

The operation interface of the Gas trolley furnace in heat treatment workshop is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Extend the service life of equipment

The Gas trolley furnace in heat treatment workshop adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Gas trolley furnace in heat treatment workshop can significantly reduce energy consumption, thus reducing operating costs.

4. Rapid temperature rise

The Gas trolley furnace in heat treatment workshop can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Extend the service life of equipment

The Gas trolley furnace in heat treatment workshop adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Gas trolley furnace in heat treatment workshop

5、Gas trolley furnace in heat treatment workshop function

Gas trolley furnace in heat treatment workshopmultifunctional, with functions such as normalizing, heat treatment, Forging heating, hardening and tempering and anneal，Strong adaptability,Easy to control,energy saving and environmental protection,energy-efficient,Easy to maintain。

Gas trolley furnace in heat treatment workshop

Gas trolley furnace in heat treatment workshopthe main structure includes recovery of waste heat, convection chamber, ventilation system, combustor, recovery of waste heat and so on，it has the functions of quench, anneal, normalizing, Forging heating and hardening and tempering，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。