What is a Split flow forging furnace? Introduction to the advantages and characteristics of forging furnace functions

Split flow forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Easy to control,Easy to maintain,energy saving and environmental protection,energy-efficient,energy saving and environmental protection，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Split flow forging furnace:

1、Brief introduction of Split flow forging furnace

Split flow forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of anneal, heat treatment, normalizing, hardening and tempering and quench。

Split flow forging furnace

2、Introduction of Split flow forging furnace characteristics

Split flow forging furnace has the following characteristics

1. Strong adaptability

The Split flow forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Stable and reliable

The Split flow forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Split flow forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Stable and reliable

The Split flow forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Split flow forging furnace

3、Split flow forging furnace performance advantage

Split flow forging furnaces have the following advantages.

1. Efficient combustion

The Split flow forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Split flow forging furnace can significantly reduce energy consumption, thus reducing operating costs.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Improve product quality

Because the Split flow forging furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Efficient combustion

The Split flow forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Split flow forging furnace

4、Split flow forging furnace function

Split flow forging furnacemultifunctional, with functions such as Casting heating, temper, Forging heating, normalizing and temper，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

Split flow forging furnace

5、Split flow forging furnace price consultation

The Split flow forging furnace price is introduced as follows:

1. region

The price of Split flow forging furnace in Shandong(Province) is much lower than that in other regions, and One-combustion energy saving is a Split flow forging furnace manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Split flow forging furnace price positioning more reasonable, low-cost and economical.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Split flow forging furnace have more or less differences in price.

3. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

4. market supply and demand

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Split flow forging furnace will be very high.

5. market factors

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Split flow forging furnace will also conform to this market law.

Split flow forging furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving has many years of experience in Split flow forging furnace production, and is a professional Split flow forging furnace manufacturer. With favorable Split flow forging furnace price, stable product quality, rich product series and perfect after-sales service system, the company strives to become an advanced Split flow forging furnace manufacturer in Jinan.。

One-combustion energy saving

Split flow forging furnaceNatural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，is a Split flow forging furnace，it mainly includes recovery of waste heat, furnace chamber, recovery of waste heat, ventilation system and furnace chamber，This Split flow forging furnaceThe structural design is more advanced and reasonable.。