What is a Intelligent trolley forging furnace? Introduction to the advantages and characteristics of forging furnace functions

Intelligent trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the main structure includes furnace chamber, convection chamber, Radiation chamber, furnace chamber and recovery of waste heat，is developed and improved by One-combustion energy saving。

1、Brief introduction of Intelligent trolley forging furnace

Intelligent trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Intelligent trolley forging furnace

2、Video analysis of Intelligent trolley forging furnace

Speak directly with facts on the spot。

Intelligent trolley forging furnace

As you can see from the live video.，One-combustion energy saving multifunctional, with functions such as Forging heating, anneal, temper, heat treatment and normalizing。

3、Intelligent trolley forging furnace function

Intelligent trolley forging furnaceit has the functions of quench, heat treatment, normalizing, quench and Forging heating，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，the product looks atmospheric.，It is a product series that integrates Metal tempering, Metal melting and casting, Metal forging heating, Metal heat treatment and Energy conservation and environmental protection，The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Intelligent trolley forging furnace

4、Intelligent trolley forging furnace application

Intelligent trolley forging furnaces have the following purposes.

1. Energy conservation and environmental protection

The Intelligent trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Intelligent trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Intelligent trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Intelligent trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Intelligent trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Intelligent trolley forging furnace

5、Advantages of Intelligent trolley forging furnace principle

Intelligent trolley forging furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a forging heating device using gas as fuel.，the product looks beautiful.，is a kind of high quality and low price Intelligent trolley forging furnace，it is an ideal choice for customers to buy Intelligent trolley forging furnace。

Intelligent trolley forging furnace

6、One-combustion energy saving delivery site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Intelligent trolley forging furnace

As you can see from the live video.One-combustion energy saving It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Intelligent trolley forging furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the main features are energy-efficient, Easy to control, energy saving and environmental protection, Stable and reliable and Strong adaptability。