Introduction to Segmented annealing industrial furnace, introduction to Forging furnace advantages and characteristics

Segmented annealing industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Stable and reliable,Easy to maintain,Strong adaptability,Easy to control,energy-efficient。The following is to introduce the Segmented annealing industrial furnace:

1、Brief introduction of Segmented annealing industrial furnace

Segmented annealing industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.，is a Segmented annealing industrial furnace。

Segmented annealing industrial furnace

2、Segmented annealing industrial furnace characteristics

The Segmented annealing industrial furnace features are as follows:

1. Strong adaptability

The Segmented annealing industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Efficient heating

The Segmented annealing industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Segmented annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Segmented annealing industrial furnace

3、Advantages of Segmented annealing industrial furnace principle

Segmented annealing industrial furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，The structural design is simple, novel and special.，generally, it is composed of ventilation system, ventilation system, furnace chamber, recovery of waste heat, combustor and other major components，it has the functions of Forging heating, temper, hardening and tempering, quench and heat treatment，support customization。

Segmented annealing industrial furnace

4、Segmented annealing industrial furnace structure

The Segmented annealing industrial furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Segmented annealing industrial furnace

5、Segmented annealing industrial furnace use

The purpose of Segmented annealing industrial furnace is introduced as follows:

1. Metal forging heating

The Segmented annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Segmented annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Segmented annealing industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Segmented annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Segmented annealing industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Segmented annealing industrial furnace

6、Company service

It takes a long time to buy the product back, and if the after-sales service is not guaranteed, it will also produce higher expenses. Therefore, when purchasing the Segmented annealing industrial furnace, we should pay special attention to the after-sales situation of the manufacturer. One-combustion energy saving provides customers with perfect pre-sale, in-sale and after-sale services, completely dispelling customers' worries and enjoying One-combustion energy saving's full-station service experience with peace of mind.。

One-combustion energy saving

Segmented annealing industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Segmented annealing industrial furnace。