Introduction to Mold trolley forging furnace and forging furnace working principle

Mold trolley forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Mold trolley forging furnace

Mold trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a kind of high quality and low price Mold trolley forging furnace，features include Strong adaptability, Easy to maintain, Strong adaptability, Easy to control and energy-efficient，the product looks atmospheric.，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Mold trolley forging furnace

2、Mold trolley forging furnace video detail

The following is the live video of Mold trolley forging furnace designed and produced by One-combustion energy saving for users, from which we can see the It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace. of Mold trolley forging furnace.。

Mold trolley forging furnace

As you can see from the live video.，One-combustion energy saving the main features are energy saving and environmental protection, Stable and reliable, Easy to control, Easy to maintain and Stable and reliable。

3、Mold trolley forging furnace function

Mold trolley forging furnacemultifunctional, with functions such as quench, temper, hardening and tempering, Casting heating and normalizing。

Mold trolley forging furnace

4、Functional advantages of Mold trolley forging furnace

Mold trolley forging furnaces have the following advantages.

1. Efficient combustion

The Mold trolley forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Rapid temperature rise

The Mold trolley forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Extend the service life of equipment

The Mold trolley forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Wide application range

The Mold trolley forging furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Mold trolley forging furnace

5、Mold trolley forging furnace application

Mold trolley forging furnaces have the following purposes.

1. Energy conservation and environmental protection

The Mold trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Mold trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Mold trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Mold trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Mold trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Mold trolley forging furnace

6、How to choose the right product manufacturer?

Choosing a suitable Mold trolley forging furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Mold trolley forging furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Mold trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，widely used in Household necessities, chemical industry, shipping, automobile, machinery and other fields。