Introduction to Double door gas trolley furnace and heating furnace structure principle

Double door gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，widely used in Household necessities, metallurgy, war industry, chemical industry, automobile and other fields，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。The following is to introduce the Double door gas trolley furnace:

1、Brief introduction of Double door gas trolley furnace

Double door gas trolley furnaceIt is a forging heating device using gas as fuel.，is a Double door gas trolley furnace，The overall structural design is simple, diverse and beautiful.，it is usually composed of Radiation chamber, ventilation system, recovery of waste heat, combustor and convection chamber，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，has been favored by more and more customers.。

Double door gas trolley furnace

2、Double door gas trolley furnace real beat

Double door gas trolley furnace specifications and models, novel design, beautiful appearance, for our customers to visit.。

Double door gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Double door gas trolley furnace principle

Double door gas trolley furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a common Double door gas trolley furnace。

Double door gas trolley furnace

4、Double door gas trolley furnace function

Double door gas trolley furnaceit has the functions of Casting heating, anneal, quench, heat treatment and Forging heating，it is widely used in pharmacy, building materials, material, shipping and Machinery manufacturing，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，can be customized according to user's needs.。

Double door gas trolley furnace

5、Double door gas trolley furnace use

The purpose of Double door gas trolley furnace is introduced as follows:

1. Metal forging heating

The Double door gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Double door gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Double door gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Double door gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Double door gas trolley furnace

6、How much is the Double door gas trolley furnace?

The Double door gas trolley furnace price is introduced as follows:

1. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

2. product model

With different specifications, the basic configuration of products will be different, and the price of products with high configuration will naturally be higher, otherwise the price will be lower, so there is a close relationship between specifications and prices.

3. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. raw material

The quality of material selection is one of the main factors that directly affect the Double door gas trolley furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

5. Different regions

One-combustion energy savingShandong(Province), the transportation is convenient, and the corresponding cost of transporting Double door gas trolley furnace is low, which reduces the cost of selling Double door gas trolley furnace by manufacturers, and the price will also decrease.

Double door gas trolley furnace

Double door gas trolley furnaceStable and reliable,Strong adaptability,Stable and reliable,energy saving and environmental protection,Easy to control，Mainly used forMetal heat treatment,Metal tempering,Metal forging heating,Metal heat treatment andImprove production efficiency，it is mainly composed of ventilation system, furnace chamber, Radiation chamber, combustor and furnace chamber，productSimple structure and reliable operation.。