What is a Natural gas trolley furnace? Introduction to the principle of Forging furnace structure

Natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Simple structure and reliable operation.，it has the structure of furnace chamber, convection chamber, ventilation system, recovery of waste heat and ventilation system，is carefully developed by One-combustion energy saving combined with advanced technology。

1、Brief introduction of Natural gas trolley furnace

Natural gas trolley furnaceIt is a forging heating device using gas as fuel.，it is an ideal choice for customers to buy Natural gas trolley furnace。

Natural gas trolley furnace

2、Natural gas trolley furnace structure composition

The Natural gas trolley furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Radiation chamber

The heat load of the main place for Natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Natural gas trolley furnace

3、Introduction of Natural gas trolley furnace characteristics

Natural gas trolley furnace has the following characteristics

1. Efficient heating

The Natural gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Natural gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Natural gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Natural gas trolley furnace

4、Natural gas trolley furnace application

Natural gas trolley furnaces have the following purposes.

1. Improve production efficiency

The Natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Natural gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Natural gas trolley furnace

5、Advantages of Natural gas trolley furnace principle

Natural gas trolley furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，energy saving and environmental protection,energy-efficient,Stable and reliable,Easy to maintain,Strong adaptability，it has the functions of Forging heating, heat treatment, quench, normalizing and Casting heating，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal tempering,Metal heat treatment and so on，super quality and competitive price。

Natural gas trolley furnace

6、Natural gas trolley furnace price consultation

The Natural gas trolley furnace price is introduced as follows:

1. market quotation

Generally, when the supply of Natural gas trolley furnace exceeds the demand in the market, the product price will naturally decrease, on the contrary, the product price will increase.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Natural gas trolley furnace have more or less differences in price.

3. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Natural gas trolley furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Natural gas trolley furnace price can meet the purchasing needs of customers.

4. company strength

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Natural gas trolley furnace. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Natural gas trolley furnace will be different.

5. regional advantages

The price of Natural gas trolley furnace in Jinan, Shandong province is much lower than that in other regions, and One-combustion energy saving is a manufacturer specializing in the production and manufacture of Natural gas trolley furnace not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Natural gas trolley furnace price positioning more reasonable, low-cost and economical.

Natural gas trolley furnace

Natural gas trolley furnaceit has the characteristics of energy-efficient, Easy to control, energy saving and environmental protection, Strong adaptability and Easy to control，it is widely used inwar industry,building materials,pharmacy,automobile,material and other industries。