What is a Natural gas regenerative through forging heating furnace? Introduction to the advantages and characteristics of heating furnace functions

Natural gas regenerative through forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as quench, normalizing, heat treatment, hardening and tempering and heat treatment，is designed by One-combustion energy saving with advanced technology。

1、Brief introduction of Natural gas regenerative through forging heating furnace

Natural gas regenerative through forging heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks atmospheric.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it has been widely used in Household necessities, chemical industry, heat treatment, aerospace, light industry and other industries。

Natural gas regenerative through forging heating furnace

2、Introduction of advantages of Natural gas regenerative through forging heating furnace

Natural gas regenerative through forging heating furnaces have the following advantages.

1. Rapid temperature rise

The Natural gas regenerative through forging heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Natural gas regenerative through forging heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Extend the service life of equipment

The Natural gas regenerative through forging heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Uniform heating

The Natural gas regenerative through forging heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Natural gas regenerative through forging heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Natural gas regenerative through forging heating furnace

3、Natural gas regenerative through forging heating furnace advantage

The advantages of Natural gas regenerative through forging heating furnace are as follows:

1. Intelligent control

The Natural gas regenerative through forging heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Rapid temperature rise

The Natural gas regenerative through forging heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Wide application range

The Natural gas regenerative through forging heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Improve product quality

Because the Natural gas regenerative through forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Natural gas regenerative through forging heating furnace

4、Natural gas regenerative through forging heating furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Natural gas regenerative through forging heating furnace

As you can see from the live video.，One-combustion energy saving It is an efficient, energy-saving and environment-friendly metal heating device.。

5、Natural gas regenerative through forging heating furnace characteristics

The Natural gas regenerative through forging heating furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Natural gas regenerative through forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Natural gas regenerative through forging heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to control

The combustion system and ventilation system of the Natural gas regenerative through forging heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Stable and reliable

The Natural gas regenerative through forging heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Natural gas regenerative through forging heating furnace

6、Natural gas regenerative through forging heating furnace quotation

The Natural gas regenerative through forging heating furnace price is introduced as follows:

1. market competition

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Natural gas regenerative through forging heating furnace. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

2. Self quality

The higher the quality of the product, the longer its service life will be, and such products can create more amazing economic value for customers as much as possible. At the same time, customers are quite fond of such products, and One-combustion energy saving's product quality is guaranteed and the price is cost-effective.

3. sales mode

One-combustion energy saving Natural gas regenerative through forging heating furnace manufacturer is a strong and professional machine shop, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Natural gas regenerative through forging heating furnace price is also low.

4. Different regions

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Natural gas regenerative through forging heating furnace.

5. Quality advantages and disadvantages

If the quality of the product is guaranteed, its service life will be longer. At the same time, the more perfect the performance, the more economic value can be created for customers, and the price of such products will be higher. One-combustion energy saving has strictly controlled the quality and the sales price is also reasonable.

Natural gas regenerative through forging heating furnace

Natural gas regenerative through forging heating furnacethe advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a popular Natural gas regenerative through forging heating furnace。