What is a Natural gas regenerative through forging furnace? Forging furnace specifications, models, and parameters

Natural gas regenerative through forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，multifunctional, with functions such as quench, hardening and tempering, Casting heating, normalizing and heat treatment，the product looks atmospheric.，is a kind of Natural gas regenerative through forging furnace manufactured by One-combustion energy saving。The following is to introduce the Natural gas regenerative through forging furnace:

1、Brief introduction of Natural gas regenerative through forging furnace

Natural gas regenerative through forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Commonly used inMetal forging heating,Metal forging heating,Metal melting and casting,Metal heat treatment,Metal tempering and so on。

Natural gas regenerative through forging furnace

2、Introduction of Natural gas regenerative through forging furnace characteristics

Natural gas regenerative through forging furnace has the following characteristics

1. Stable and reliable

The Natural gas regenerative through forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Natural gas regenerative through forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Natural gas regenerative through forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Efficient heating

The Natural gas regenerative through forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Natural gas regenerative through forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Natural gas regenerative through forging furnace

3、Natural gas regenerative through forging furnace picture

Beautiful design, excellent material selection and excellent quality.。

Natural gas regenerative through forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Structural advantages of Natural gas regenerative through forging furnace

The Natural gas regenerative through forging furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Radiation chamber

The heat load of the main place for Natural gas regenerative through forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Natural gas regenerative through forging furnace

5、Working principle of Natural gas regenerative through forging furnace

Natural gas regenerative through forging furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it can be used in machinery, heat treatment, shipping, petroleum, building materials and other industries，Widely used in Improve production efficiency, Metal tempering, Metal melting and casting, Metal tempering and Improve production efficiency，the product looks beautiful.，has been favored by more and more customers.。

Natural gas regenerative through forging furnace

Natural gas regenerative through forging furnaceit has the characteristics of energy saving and environmental protection, Easy to maintain, energy-efficient, Easy to maintain and energy saving and environmental protection，It has a wide range of uses, including Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Energy conservation and environmental protection and Metal heat treatment，it has the functions of anneal, Forging heating, Casting heating, anneal and temper。