Introduction to Regenerative gas tube furnace and Forging furnace working principle

Regenerative gas tube furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.，the main structure includes Radiation chamber, Radiation chamber, combustor, ventilation system and recovery of waste heat。The following is to introduce the Regenerative gas tube furnace:

1、Brief introduction of Regenerative gas tube furnace

Regenerative gas tube furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main features are energy saving and environmental protection, Stable and reliable, Easy to maintain, Easy to control and Strong adaptability，be loved by our customers.。

Regenerative gas tube furnace

2、Regenerative gas tube furnace use

The purpose of Regenerative gas tube furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative gas tube furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Regenerative gas tube furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Regenerative gas tube furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Regenerative gas tube furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Regenerative gas tube furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Regenerative gas tube furnace

3、Regenerative gas tube furnace characteristics

The Regenerative gas tube furnace features are as follows:

1. Efficient heating

The Regenerative gas tube furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Regenerative gas tube furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to maintain

The structural design of the Regenerative gas tube furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Regenerative gas tube furnace

4、Advantages of Regenerative gas tube furnace principle

Regenerative gas tube furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Mainly used forMetal heat treatment,Improve production efficiency,Metal tempering,Metal melting and casting andEnergy conservation and environmental protection。

Regenerative gas tube furnace

5、Regenerative gas tube furnace customer scene picture

The following picture is a panoramic shot of One-combustion energy saving Regenerative gas tube furnace,the product looks atmospheric., which is trustworthy.。

Regenerative gas tube furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Regenerative gas tube furnacethe product looks beautiful.，it has the functions of hardening and tempering, heat treatment, normalizing, anneal and Casting heating，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。