Introduction to Pressure vessel trolley forging heating furnace, Forging furnace specifications, model parameters

Pressure vessel trolley forging heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as quench, Forging heating, temper, heat treatment and normalizing。The following is to introduce the Pressure vessel trolley forging heating furnace:

1、Brief introduction of Pressure vessel trolley forging heating furnace

Pressure vessel trolley forging heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，widely used in metallurgy, shipping, light industry, aerospace, pharmacy and other fields，the product looks beautiful.，is designed by One-combustion energy saving with advanced technology。

Pressure vessel trolley forging heating furnace

2、Advantages of Pressure vessel trolley forging heating furnace principle

Pressure vessel trolley forging heating furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Commonly used inMetal forging heating,Metal tempering,Energy conservation and environmental protection,Metal heat treatment,Metal melting and casting and so on，it is usually composed of ventilation system, ventilation system, recovery of waste heat, Radiation chamber and convection chamber。

Pressure vessel trolley forging heating furnace

3、Pressure vessel trolley forging heating furnace function

Pressure vessel trolley forging heating furnaceit has the functions of temper, Casting heating, anneal, quench and Forging heating，it is widely used in war industry, Household necessities, heat treatment, machinery and aerospace，it has the characteristics of Stable and reliable, energy saving and environmental protection, Strong adaptability, Easy to maintain and energy-efficient，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Pressure vessel trolley forging heating furnace

4、Pressure vessel trolley forging heating furnace structure

The Pressure vessel trolley forging heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Pressure vessel trolley forging heating furnace

5、Pressure vessel trolley forging heating furnace price advantage

The Pressure vessel trolley forging heating furnace price is introduced as follows:

1. Self quality

Usually, the price of good quality products will be higher, because the product has higher technical content and more costs in raw materials and labor, but the performance of such products is higher and the profits will be higher. On the contrary, the price of ordinary quality products will be relatively lower, but the benefits will be correspondingly poor.

2. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. market supply and demand

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Pressure vessel trolley forging heating furnace will also conform to this market law.

Pressure vessel trolley forging heating furnace

6、Company selection skills

Choosing a suitable Pressure vessel trolley forging heating furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Pressure vessel trolley forging heating furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Pressure vessel trolley forging heating furnacemultifunctional, with functions such as heat treatment, hardening and tempering, heat treatment, hardening and tempering and temper，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，widely used inpetroleum,machinery,chemical industry,Machinery manufacturing,surface treatment and other industries。