Introduction to Quenching trolley forging heating furnace and Forging furnace advantages and features

Quenching trolley forging heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

1、Brief introduction of Quenching trolley forging heating furnace

Quenching trolley forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a kind of high quality and low price Quenching trolley forging heating furnace，can be customized according to user's needs.。

Quenching trolley forging heating furnace

2、Working principle of Quenching trolley forging heating furnace

Quenching trolley forging heating furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is an ideal choice for customers to buy Quenching trolley forging heating furnace。

Quenching trolley forging heating furnace

3、Quenching trolley forging heating furnace characteristics

The Quenching trolley forging heating furnace features are as follows:

1. Strong adaptability

The Quenching trolley forging heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Efficient heating

The Quenching trolley forging heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Quenching trolley forging heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Quenching trolley forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Quenching trolley forging heating furnace

4、Quenching trolley forging heating furnace structure

The Quenching trolley forging heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Quenching trolley forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Quenching trolley forging heating furnace

5、Quenching trolley forging heating furnace structure

The Quenching trolley forging heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Quenching trolley forging heating furnace

6、Advantages of Quenching trolley forging heating furnace principle

Quenching trolley forging heating furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is mainly composed of ventilation system, furnace chamber, ventilation system, combustor and furnace chamber，is based on One-combustion energy saving is a kind of Quenching trolley forging heating furnace manufactured by One-combustion energy saving。

Quenching trolley forging heating furnace

Quenching trolley forging heating furnaceit is widely used in metallurgy, Household necessities, war industry, heat treatment, machinery and other industries，features include energy saving and environmental protection, Strong adaptability, energy-efficient, Easy to control and energy saving and environmental protection。