Introduction to Fully automatic continuous heat treatment heating furnace and forging furnace advantages and features

Fully automatic continuous heat treatment heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of Casting heating, quench, heat treatment, normalizing and anneal。The following is to introduce the Fully automatic continuous heat treatment heating furnace:

1、Brief introduction of Fully automatic continuous heat treatment heating furnace

Fully automatic continuous heat treatment heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a Fully automatic continuous heat treatment heating furnace，it is widely used inaerospace,Household necessities,automobile,heat treatment,material and other industries，it is an ideal choice for customers to buy Fully automatic continuous heat treatment heating furnace。

Fully automatic continuous heat treatment heating furnace

2、Fully automatic continuous heat treatment heating furnace use

The purpose of Fully automatic continuous heat treatment heating furnace is introduced as follows:

1. Metal forging heating

The Fully automatic continuous heat treatment heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Fully automatic continuous heat treatment heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Fully automatic continuous heat treatment heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Fully automatic continuous heat treatment heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Fully automatic continuous heat treatment heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Fully automatic continuous heat treatment heating furnace

3、Fully automatic continuous heat treatment heating furnace function

Fully automatic continuous heat treatment heating furnacemultifunctional, with functions such as Forging heating, temper, hardening and tempering, quench and heat treatment，usually used in electron, chemical industry, metallurgy, petroleum, Machinery manufacturing and other fields，the product looks beautiful.，the main structure includes recovery of waste heat, recovery of waste heat, combustor, ventilation system, Radiation chamber and so on，Fully automatic continuous heat treatment heating furnaceThe structural design is more advanced and reasonable.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

Fully automatic continuous heat treatment heating furnace

4、Fully automatic continuous heat treatment heating furnace structure composition

The Fully automatic continuous heat treatment heating furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Fully automatic continuous heat treatment heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Fully automatic continuous heat treatment heating furnace

5、Fully automatic continuous heat treatment heating furnace price

The Fully automatic continuous heat treatment heating furnace price is introduced as follows:

1. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. Brand strength

At present, there are various brands of Fully automatic continuous heat treatment heating furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Fully automatic continuous heat treatment heating furnace are different.

3. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

4. Reasonable cost

Product manufacturers are different, and the cost spent by each manufacturer in producing products is definitely different. The higher the cost of producing products, the higher the price of products set by manufacturers. On the contrary, the Fully automatic continuous heat treatment heating furnace price is low.

5. Manufacturer's sales model

One-combustion energy saving Fully automatic continuous heat treatment heating furnace manufacturer is a large Fully automatic continuous heat treatment heating furnace manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Fully automatic continuous heat treatment heating furnace price is also low.

Fully automatic continuous heat treatment heating furnace

6、Why choose One-combustion energy saving?

Choosing a suitable Fully automatic continuous heat treatment heating furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Fully automatic continuous heat treatment heating furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Fully automatic continuous heat treatment heating furnacethe main features are Strong adaptability, energy saving and environmental protection, Stable and reliable, Easy to control and Easy to maintain，It is mostly used in Metal melting and casting, Metal forging heating, Improve production efficiency, Metal forging heating, Metal tempering, Energy conservation and environmental protection and so on，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。