Introduction and advantages of Quenching gas trolley furnace

Quenching gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，was developed and designed by One-combustion energy saving。The following is to introduce the Quenching gas trolley furnace:

1、Brief introduction of Quenching gas trolley furnace

Quenching gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Quenching gas trolley furnace

2、Quenching gas trolley furnace HD picture

High-definition pictures of Quenching gas trolley furnace of different specifications and models,the product looks beautiful., reliable in quality and trustworthy.。

Quenching gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Quenching gas trolley furnace characteristics

Quenching gas trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Quenching gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Quenching gas trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Efficient heating

The Quenching gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to control

The combustion system and ventilation system of the Quenching gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Stable and reliable

The Quenching gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Quenching gas trolley furnace

4、Quenching gas trolley furnace structure composition

The Quenching gas trolley furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. Radiation chamber

The heat load of the main place for Quenching gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Quenching gas trolley furnace

5、Working principle of Quenching gas trolley furnace

Quenching gas trolley furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Easy to maintain,energy-efficient,Easy to control,Easy to control,energy-efficient。

Quenching gas trolley furnace

6、Brief introduction of Quenching gas trolley furnace

Quenching gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，super quality and competitive price。

Quenching gas trolley furnace

Quenching gas trolley furnacemultifunctional, with functions such as Casting heating, heat treatment, anneal, Forging heating and heat treatment，It has a wide range of uses, including Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Improve production efficiency and Metal forging heating，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。