What is a Combination walking heat treatment furnace? Introduction to the principle of forging furnace structure

Combination walking heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a common Combination walking heat treatment furnace，the main features are Easy to control, Strong adaptability, Stable and reliable, energy saving and environmental protection and Easy to control，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，it has the functions of normalizing, heat treatment, anneal, quench and hardening and tempering。

1、Brief introduction of Combination walking heat treatment furnace

Combination walking heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，widely used in heat treatment, machinery, aerospace, building materials, light industry and other fields，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is developed and improved by One-combustion energy saving。

Combination walking heat treatment furnace

2、Functional advantages of Combination walking heat treatment furnace

Combination walking heat treatment furnaces have the following advantages.

1. Extend the service life of equipment

The Combination walking heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Rapid temperature rise

The Combination walking heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Combination walking heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. easy to operate

The operation interface of the Combination walking heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Combination walking heat treatment furnace

3、Combination walking heat treatment furnace function

Combination walking heat treatment furnaceit has the functions of Forging heating, Casting heating, heat treatment, quench and Forging heating，Widely used in Metal melting and casting, Metal heat treatment, Metal tempering, Improve production efficiency and Metal forging heating，Easy to maintain,Strong adaptability,energy-efficient,energy saving and environmental protection,Easy to maintain，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，modern technology。

Combination walking heat treatment furnace

4、Combination walking heat treatment furnace application

Combination walking heat treatment furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Combination walking heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Combination walking heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Combination walking heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Combination walking heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Combination walking heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Combination walking heat treatment furnace

5、Combination walking heat treatment furnace principle

Combination walking heat treatment furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，customizable。

Combination walking heat treatment furnace

6、Combination walking heat treatment furnace price consultation

The Combination walking heat treatment furnace price is introduced as follows:

1. Model specification

With different specifications, the basic configuration of products will be different, and the price of products with high configuration will naturally be higher, otherwise the price will be lower, so there is a close relationship between specifications and prices.

2. Sales model

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

3. market supply and demand

The difference between the supply and demand of manufacturers and customers will also affect the Combination walking heat treatment furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Combination walking heat treatment furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Combination walking heat treatment furnace price will decrease.

4. raw material

The quality of material selection is one of the main factors that directly affect the Combination walking heat treatment furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

5. Low cost of raw materials

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. One-combustion energy saving has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

Combination walking heat treatment furnace

Combination walking heat treatment furnaceIt is a forging heating device using gas as fuel.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。