What is a High temperature push-pull gas trolley furnace? How much is the price of the forging furnace?

High temperature push-pull gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks atmospheric.，Cheap and high quality。

1、Brief introduction of High temperature push-pull gas trolley furnace

High temperature push-pull gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a popular High temperature push-pull gas trolley furnace，Structure consists of furnace chamber, recovery of waste heat, furnace chamber, recovery of waste heat, combustor and so on，This High temperature push-pull gas trolley furnaceThe overall structural design is simple and novel.，is a common High temperature push-pull gas trolley furnace，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

High temperature push-pull gas trolley furnace

2、High temperature push-pull gas trolley furnace application

High temperature push-pull gas trolley furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature push-pull gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The High temperature push-pull gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The High temperature push-pull gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal heat treatment

In addition to forging heating, High temperature push-pull gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The High temperature push-pull gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

High temperature push-pull gas trolley furnace

3、Introduction of advantages of High temperature push-pull gas trolley furnace

High temperature push-pull gas trolley furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the High temperature push-pull gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Efficient combustion

The High temperature push-pull gas trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Intelligent control

The High temperature push-pull gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Rapid temperature rise

The High temperature push-pull gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Uniform heating

The High temperature push-pull gas trolley furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

High temperature push-pull gas trolley furnace

4、Structural advantages of High temperature push-pull gas trolley furnace

The High temperature push-pull gas trolley furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for High temperature push-pull gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

High temperature push-pull gas trolley furnace

5、High temperature push-pull gas trolley furnace introduction video

The following is the live video of High temperature push-pull gas trolley furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency. of One-combustion energy savingproduce的High temperature push-pull gas trolley furnace.。

High temperature push-pull gas trolley furnace

As you can see from the live video.，One-combustion energy saving multifunctional, with functions such as quench, temper, hardening and tempering, heat treatment and Casting heating。

6、Working principle of High temperature push-pull gas trolley furnace

High temperature push-pull gas trolley furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it is widely used inheat treatment,material,shipping,petroleum,building materials and other industries，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，The overall structural design is relatively simple and compact.，it is usually composed of convection chamber, ventilation system, Radiation chamber, ventilation system and Radiation chamber，has been favored by more and more customers.。

High temperature push-pull gas trolley furnace

High temperature push-pull gas trolley furnaceit has been widely used in Machinery manufacturing, aerospace, chemical industry, pharmacy, light industry and other industries，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。