What is a Foundry denitration equipment? Introduction to the advantages and characteristics of SCR flue gas denitrification functions

Foundry denitration equipmentit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，it is usually composed of Catalyst supply system, Temperature control and monitoring system, control system, Catalyst reactor and Flue gas mixing and distribution system。

1、Brief introduction of Foundry denitration equipment

Foundry denitration equipmentdelective catalytic reduction technology is an efficient flue gas denitrification technology.，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Foundry denitration equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Foundry denitration equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Foundry denitration equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Foundry denitration equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Foundry denitration equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Foundry denitration equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Foundry denitration equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，it has the characteristics of High denitration efficiency, Good selectivity, Strong adaptability, Strong adaptability and High denitration efficiency，it has the functions of Improve working conditions, Improve energy efficiency, Promote sustainable development, Promote sustainable development and Improve energy efficiency，it is an ideal choice for customers to buy Foundry denitration equipment。

Foundry denitration equipment

2、Functional advantages of Foundry denitration equipment

Foundry denitration equipments have the following advantages.

1. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Foundry denitration equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Foundry denitration equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

2. Environmental friendliness

The by-products produced by Foundry denitration equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Foundry denitration equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

3. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Foundry denitration equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

4. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Foundry denitration equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

5. Environmental friendliness

The by-products produced by Foundry denitration equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Foundry denitration equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

Foundry denitration equipment

3、Video analysis of Foundry denitration equipment

The following is the live video of Foundry denitration equipment designed and produced by One-combustion energy saving for users, from which we can see the the advantage is It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Foundry denitration equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Foundry denitration equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Technology has been developed and applied for many years, and it is mature and stable. The Foundry denitration equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Foundry denitration equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Foundry denitration equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Foundry denitration equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency. of Foundry denitration equipment.。

Foundry denitration equipment

As you can see from the live video.，One-combustion energy saving is a popular Foundry denitration equipment。

4、Advantages of Foundry denitration equipment principle

Foundry denitration equipmentCatalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，can be customized according to user's needs.。

Foundry denitration equipment

5、Foundry denitration equipment structure

The Foundry denitration equipment has the following structure

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

3. control system

The whole Foundry denitration equipment is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

4. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

5. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

Foundry denitration equipment

6、Foundry denitration equipment price advantage

The Foundry denitration equipment price is introduced as follows:

1. Reasonable cost

A Foundry denitration equipment needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

2. quality

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

3. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Foundry denitration equipment price and service can meet the actual needs of customers.

4. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

5. Brand strength

At present, there are various brands of Foundry denitration equipment in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Foundry denitration equipment are different.

Foundry denitration equipment

Foundry denitration equipmentit has been widely used in metallurgy, cement plant, iron and steel plant, coal-fired power station, Gas power plant and other industries，The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Foundry denitration equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Foundry denitration equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Foundry denitration equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Foundry denitration equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Foundry denitration equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Foundry denitration equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Foundry denitration equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.。