What is a Denitrification inside the furnace? Introduction to the Working Principle of SCR denitration system

Denitrification inside the furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.。The following is to introduce the Denitrification inside the furnace:

1、Brief introduction of Denitrification inside the furnace

Denitrification inside the furnaceit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，it mainly includes Catalyst supply system, control system, Temperature control and monitoring system, Flue gas mixing and distribution system and Catalyst reactor，Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification inside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification inside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification inside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification inside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification inside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification inside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.，Commonly used inImprove product quality,Meet the requirements of environmental protection,environmental protection,Promote sustainable development,Flue gas denitrification and so on，Cheap and high quality。

Denitrification inside the furnace

2、Denitrification inside the furnace function

Denitrification inside the furnaceit has the functions of Promote sustainable development, environmental protection, Improve working conditions, environmental protection and Promote sustainable development，it is an ideal choice for customers to buy Denitrification inside the furnace。

Denitrification inside the furnace

3、Denitrification inside the furnace principle

Denitrification inside the furnaceat the start of the operation,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，it refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.。

Denitrification inside the furnace

4、Denitrification inside the furnace use

Denitrification inside the furnaceIt has a wide range of uses, and is often used inenvironmental protection,Improve product quality,Meet the requirements of environmental protection,Promote sustainable development,Flue gas denitrification and so on，is a popular Denitrification inside the furnace，the advantage is It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification inside the furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification inside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification inside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification inside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification inside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification inside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification inside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification inside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification inside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification inside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.，that is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.。

Denitrification inside the furnace

5、Denitrification inside the furnace quotation

The Denitrification inside the furnace price is introduced as follows:

1. Low cost of raw materials

A Denitrification inside the furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

2. Model size

Because of the different specifications of products, its price will be different, so its selling price is closely related to the model specifications, but the overall selling price of One-combustion energy saving is reasonable among similar products.

3. region

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

Denitrification inside the furnace

6、One-combustion energy saving introduced

One-combustion energy saving, as one of the professional and powerful Denitrification inside the furnace manufacturers in Shandong(Province), produces Denitrification inside the furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Denitrification inside the furnacethe product looks beautiful.，the full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，is a Denitrification inside the furnace。