What is a Through type annealing heat treatment furnace? Introduction to the advantages and characteristics of the heating furnace

Through type annealing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Commonly used inMetal forging heating,Improve production efficiency,Metal melting and casting,Metal heat treatment,Energy conservation and environmental protection and so on，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，the product looks atmospheric.。The following is to introduce the Through type annealing heat treatment furnace:

1、Brief introduction of Through type annealing heat treatment furnace

Through type annealing heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Mainly used forMetal forging heating,Metal heat treatment,Energy conservation and environmental protection,Metal tempering andMetal melting and casting，it is mainly composed of furnace chamber, convection chamber, recovery of waste heat, Radiation chamber and ventilation system，Through type annealing heat treatment furnaceThe overall structural design is simple, diverse and beautiful.，support customization。

Through type annealing heat treatment furnace

2、Through type annealing heat treatment furnace video detail

The following is the live video of Through type annealing heat treatment furnace designed and produced by One-combustion energy saving for users, from which we can see the The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability. of One-combustion energy savingproduce的Through type annealing heat treatment furnace.。

Through type annealing heat treatment furnace

As you can see from the live video.，One-combustion energy saving widely used in material, electron, metallurgy, Machinery manufacturing, automobile and other fields。

3、Through type annealing heat treatment furnace performance advantage

Through type annealing heat treatment furnaces have the following advantages.

1. Rapid temperature rise

The Through type annealing heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Uniform heating

The Through type annealing heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Through type annealing heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Improve product quality

Because the Through type annealing heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Extend the service life of equipment

The Through type annealing heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Through type annealing heat treatment furnace

4、Through type annealing heat treatment furnace structure

The Through type annealing heat treatment furnace structure is introduced as follows:

1. Radiation chamber

The heat load of the main place for Through type annealing heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. furnace chamber

A space for holding metallic materials for heating.

Through type annealing heat treatment furnace

5、Through type annealing heat treatment furnace price consultation

The Through type annealing heat treatment furnace price is introduced as follows:

1. Company size

The nature of the manufacturer can also greatly affect the price of the Through type annealing heat treatment furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. quality factor

The selling price of excellent quality products is also high, so customers should also consider the quality and price of products comprehensively in the process of purchasing products, so as to buy products with high cost performance.

4. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

5. Brand strength

At present, there are various brands of Through type annealing heat treatment furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Through type annealing heat treatment furnace are different.

Through type annealing heat treatment furnace

6、Real-time shooting in One-combustion energy saving's production workshop

The finished products of the Through type annealing heat treatment furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Through type annealing heat treatment furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Through type annealing heat treatment furnaceIt is a forging heating device using gas as fuel.，Structure consists of combustor, ventilation system, furnace chamber, combustor, recovery of waste heat and so on，is a common Through type annealing heat treatment furnace。