Introduction to Heating furnace flue gas denitrification equipment, SCR flue gas denitrification specifications, model parameters

Heating furnace flue gas denitrification equipmentthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，at the start of the operation,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，the product looks beautiful.，There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Heating furnace flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Heating furnace flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Heating furnace flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Heating furnace flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Heating furnace flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Heating furnace flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Heating furnace flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，it has the functions of Promote sustainable development, Improve working conditions, environmental protection, Improve energy efficiency and Promote sustainable development。

1、Brief introduction of Heating furnace flue gas denitrification equipment

Heating furnace flue gas denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.，be loved by our customers.。

Heating furnace flue gas denitrification equipment

2、Heating furnace flue gas denitrification equipment function

Heating furnace flue gas denitrification equipmentmultifunctional, with functions such as Improve energy efficiency, environmental protection, Improve working conditions, Promote sustainable development and environmental protection，it refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，customizable。

Heating furnace flue gas denitrification equipment

3、Heating furnace flue gas denitrification equipment picture

The panoramic shooting of One-combustion energy saving Heating furnace flue gas denitrification equipment is shown as follows.。

Heating furnace flue gas denitrification equipment

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Advantages of Heating furnace flue gas denitrification equipment principle

Heating furnace flue gas denitrification equipmentthe principle is simple.Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，the product looks beautiful.，is based on One-combustion energy saving is a Heating furnace flue gas denitrification equipment newly developed by One-combustion energy saving。

Heating furnace flue gas denitrification equipment

5、Heating furnace flue gas denitrification equipment price concessions

The Heating furnace flue gas denitrification equipment price is introduced as follows:

1. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

4. Manufacturer's strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

5. model

One-combustion energy saving is a direct selling manufacturer, the Heating furnace flue gas denitrification equipment of various specifications and models manufactured are affordable, reliable in quality, good in performance and perfect after-sales, which is a good choice for everyone to buy Heating furnace flue gas denitrification equipment.

Heating furnace flue gas denitrification equipment

6、One-combustion energy saving delivery site

On-site aerial photography of Heating furnace flue gas denitrification equipment。

Heating furnace flue gas denitrification equipment

As you can see from the live video.One-combustion energy saving It has a wide range of uses, and is often used inenvironmental protection,Meet the requirements of environmental protection,Improve product quality,environmental protection,Promote sustainable development and so on。

Heating furnace flue gas denitrification equipmentUnder the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，it has been widely used in iron and steel plant, metallurgy, Gas power plant, coal-fired power station, building materials and other industries。