What is a Well type copper tube annealing furnace? forging furnace specifications, models, and parameters

Well type copper tube annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The overall structural design is simple, diverse and beautiful.，Structure consists of recovery of waste heat, ventilation system, combustor, Radiation chamber, recovery of waste heat and so on，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.，Cheap and high quality。

1、Brief introduction of Well type copper tube annealing furnace

Well type copper tube annealing furnaceIt is a forging heating device using gas as fuel.，Widely used inMetal forging heating,Metal melting and casting,Energy conservation and environmental protection,Metal forging heating,Metal melting and casting and so on，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Well type copper tube annealing furnace

2、Well type copper tube annealing furnace HD real picture

Provide a variety of specifications and models of Well type copper tube annealing furnace, high-definition picture list.。

Well type copper tube annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Well type copper tube annealing furnace principle

Well type copper tube annealing furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，Simple structure and reliable operation.，it is mainly composed of ventilation system, combustor, furnace chamber, ventilation system and convection chamber，the product looks atmospheric.，it has the characteristics of Strong adaptability, Easy to maintain, Strong adaptability, energy saving and environmental protection and energy-efficient。

Well type copper tube annealing furnace

4、Well type copper tube annealing furnace use

The purpose of Well type copper tube annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Well type copper tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type copper tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Well type copper tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Well type copper tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Well type copper tube annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Well type copper tube annealing furnace

5、Well type copper tube annealing furnace characteristics

The Well type copper tube annealing furnace features are as follows:

1. Strong adaptability

The Well type copper tube annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Well type copper tube annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Well type copper tube annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Well type copper tube annealing furnace

6、Why choose One-combustion energy saving?

Choosing a suitable Well type copper tube annealing furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Well type copper tube annealing furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Well type copper tube annealing furnaceis a kind of high quality and low price Well type copper tube annealing furnace，It can be used for Metal tempering, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting and so on。