Introduction to Stick type spheroidization heat treatment furnace and heating furnace working principle

Stick type spheroidization heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Stick type spheroidization heat treatment furnace，The overall structural design is simple and novel.，it is mainly composed of recovery of waste heat, furnace chamber, convection chamber, Radiation chamber and combustor，it is an ideal choice for customers to buy Stick type spheroidization heat treatment furnace。

1、Brief introduction of Stick type spheroidization heat treatment furnace

Stick type spheroidization heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.，super quality and competitive price。

Stick type spheroidization heat treatment furnace

2、Stick type spheroidization heat treatment furnace performance advantage

The advantages of Stick type spheroidization heat treatment furnace are as follows:

1. Uniform heating

The Stick type spheroidization heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Improve product quality

Because the Stick type spheroidization heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Extend the service life of equipment

The Stick type spheroidization heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Rapid temperature rise

The Stick type spheroidization heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Stick type spheroidization heat treatment furnace

3、Video analysis of Stick type spheroidization heat treatment furnace

On-site aerial photography of Stick type spheroidization heat treatment furnace。

Stick type spheroidization heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd widely used in heat treatment, pharmacy, shipping, electron, chemical industry and other fields。

4、Stick type spheroidization heat treatment furnace application

Stick type spheroidization heat treatment furnaces have the following purposes.

1. Energy conservation and environmental protection

The Stick type spheroidization heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Stick type spheroidization heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick type spheroidization heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The Stick type spheroidization heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Stick type spheroidization heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Stick type spheroidization heat treatment furnace

5、Stick type spheroidization heat treatment furnace function

Stick type spheroidization heat treatment furnaceit has the functions of heat treatment, anneal, normalizing, hardening and tempering and temper，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It can be used for Metal tempering, Improve production efficiency, Metal melting and casting, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection and so on，is a Stick type spheroidization heat treatment furnace newly developed by One-combustion energy saving。

Stick type spheroidization heat treatment furnace

6、Stick type spheroidization heat treatment furnace price

The Stick type spheroidization heat treatment furnace price is introduced as follows:

1. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. marketing channel

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. Manufacturer's strength

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

4. Quality advantages and disadvantages

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Stick type spheroidization heat treatment furnace.

5. product configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Stick type spheroidization heat treatment furnace has a higher cost performance.

Stick type spheroidization heat treatment furnace

Stick type spheroidization heat treatment furnaceAdopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is a Stick type spheroidization heat treatment furnace。