What is a Low temperature absorption SCR denitrification system? Introduction to the advantages and characteristics of SCR denitration system functions

Low temperature absorption SCR denitrification systemthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，in the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，features include Strong adaptability, energy saving and environmental protection, Efficient denitration, Environmental protection and pollution-free and Less secondary pollution，generally, it is composed of Catalyst supply system, Temperature control and monitoring system, Catalyst reactor, control system, Flue gas mixing and distribution system and other major components，This Low temperature absorption SCR denitrification systemThe structural design is simple, novel and special.，it has the functions of Promote sustainable development, environmental protection, Improve energy efficiency, Improve working conditions and Promote sustainable development。

1、Brief introduction of Low temperature absorption SCR denitrification system

Low temperature absorption SCR denitrification systemit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，It is mostly used in Promote sustainable development, Improve product quality, Flue gas denitrification, environmental protection, Promote sustainable development, Flue gas denitrification and so on，it has been widely used in coal-fired power station, coal-fired power station, Gas power plant, metallurgy, cement plant and other industries。

Low temperature absorption SCR denitrification system

2、Video analysis of Low temperature absorption SCR denitrification system

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Low temperature absorption SCR denitrification system production process and production site, and gain favorable comments and recognition from customers.。

Low temperature absorption SCR denitrification system

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd Good selectivity,Stable operation,Mature and stable technology,Environment friendly,energy saving and environmental protection。

3、Low temperature absorption SCR denitrification system function

Low temperature absorption SCR denitrification systemmultifunctional, with functions such as Improve working conditions, environmental protection, Improve energy efficiency, Promote sustainable development and Improve energy efficiency，it is usually composed of control system, Catalyst reactor, Catalyst supply system, Temperature control and monitoring system and Flue gas mixing and distribution system，productSimple structure and reliable operation.，the advantage is The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature absorption SCR denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature absorption SCR denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature absorption SCR denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature absorption SCR denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature absorption SCR denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature absorption SCR denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature absorption SCR denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature absorption SCR denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.，Widely used in Meet the requirements of environmental protection, Improve product quality, Promote sustainable development, Meet the requirements of environmental protection and environmental protection，has been favored by more and more customers.。

Low temperature absorption SCR denitrification system

4、Advantages of Low temperature absorption SCR denitrification system principle

Low temperature absorption SCR denitrification systemAmmonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，It has the functions of Flue gas denitrification, Improve product quality, Flue gas denitrification, Meet the requirements of environmental protection and environmental protection，the product looks beautiful.，is a popular Low temperature absorption SCR denitrification system，the main features are Promote sustainable development, High denitration efficiency, Stable operation, Strong adaptability and Mature technology。

Low temperature absorption SCR denitrification system

5、On-site real shot of Low temperature absorption SCR denitrification system

The beauty of Low temperature absorption SCR denitrification system comes from the detail design.。

Low temperature absorption SCR denitrification system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Low temperature absorption SCR denitrification system quotation

The Low temperature absorption SCR denitrification system price is introduced as follows:

1. type of operation

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Low temperature absorption SCR denitrification system is low.

2. Model size

The same equipment, even with different models and different configurations, has different investment costs, so the price will be different.

3. mass discrepancy

One-combustion energy saving attaches great importance to the quality of products, which can be reflected in the manufacturing process of Low temperature absorption SCR denitrification system and the handling of details. Therefore, there is also a close relationship between quality and price. The price of high-quality products will naturally be high, and vice versa.

4. cost of production

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. One-combustion energy saving has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

5. sales mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

Low temperature absorption SCR denitrification system

Low temperature absorption SCR denitrification systemthe product looks atmospheric.，at runtime,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.。