Introduction to Deep well high-temperature annealing furnace, advantages, characteristics and principles of Forging furnace

Deep well high-temperature annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，the main features are energy saving and environmental protection, Strong adaptability, Easy to maintain, energy-efficient and Strong adaptability。The following is to introduce the Deep well high-temperature annealing furnace:

1、Brief introduction of Deep well high-temperature annealing furnace

Deep well high-temperature annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in light industry, metallurgy, pharmacy, heat treatment and war industry，It has a wide range of uses, including Improve production efficiency, Metal melting and casting, Metal heat treatment, Improve production efficiency and Metal tempering，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，has been favored by more and more customers.。

Deep well high-temperature annealing furnace

2、Deep well high-temperature annealing furnace working site

The following is the live video of Deep well high-temperature annealing furnace designed and produced by One-combustion energy saving for users, from which we can see the Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time. of One-combustion energy savingDeep well high-temperature annealing furnace.。

Deep well high-temperature annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd Stable and reliable,energy saving and environmental protection,Easy to control,Easy to maintain,energy-efficient。

3、Deep well high-temperature annealing furnace function

Deep well high-temperature annealing furnaceit has the functions of temper, Casting heating, heat treatment, hardening and tempering and quench，Cheap and high quality。

Deep well high-temperature annealing furnace

4、Deep well high-temperature annealing furnace characteristics

The Deep well high-temperature annealing furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Efficient heating

The Deep well high-temperature annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Stable and reliable

The Deep well high-temperature annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Deep well high-temperature annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Deep well high-temperature annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Deep well high-temperature annealing furnace

5、Deep well high-temperature annealing furnace use

The purpose of Deep well high-temperature annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Deep well high-temperature annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Deep well high-temperature annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The Deep well high-temperature annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Deep well high-temperature annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Deep well high-temperature annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Deep well high-temperature annealing furnace

6、One-combustion energy saving workshop real shot

Speak directly with facts on the spot。

Deep well high-temperature annealing furnace

As you can see from the live video.One-combustion energy saving Mainly used forMetal heat treatment,Metal forging heating,Energy conservation and environmental protection,Metal melting and casting andMetal heat treatment。

Deep well high-temperature annealing furnacethe advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It is an efficient, energy-saving and environment-friendly metal heating device.，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。