What is a Rotary annealing industrial furnace? Introduction to the advantages and characteristics of Forging furnace functions

Rotary annealing industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，modern technology。The following is to introduce the Rotary annealing industrial furnace:

1、Brief introduction of Rotary annealing industrial furnace

Rotary annealing industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The overall structural design is relatively simple and compact.，the main structure includes furnace chamber, convection chamber, Radiation chamber, combustor, ventilation system and so on。

Rotary annealing industrial furnace

2、Rotary annealing industrial furnace structure

The Rotary annealing industrial furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Rotary annealing industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Rotary annealing industrial furnace

3、Functional advantages of Rotary annealing industrial furnace

Rotary annealing industrial furnaces have the following advantages.

1. Uniform heating

The Rotary annealing industrial furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Efficient combustion

The Rotary annealing industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Rapid temperature rise

The Rotary annealing industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Extend the service life of equipment

The Rotary annealing industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Rotary annealing industrial furnace

4、Rotary annealing industrial furnace characteristics

The Rotary annealing industrial furnace features are as follows:

1. Easy to maintain

The structural design of the Rotary annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

The combustion system and ventilation system of the Rotary annealing industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Strong adaptability

The Rotary annealing industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Rotary annealing industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Efficient heating

The Rotary annealing industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Rotary annealing industrial furnace

5、Rotary annealing industrial furnace working site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Rotary annealing industrial furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Rotary annealing industrial furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it is widely used in material, Household necessities, electron, automobile, building materials and other industries。

6、Introduction of Rotary annealing industrial furnace characteristics

Rotary annealing industrial furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Rotary annealing industrial furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Efficient heating

The Rotary annealing industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to maintain

The structural design of the Rotary annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Stable and reliable

The Rotary annealing industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Rotary annealing industrial furnace

Rotary annealing industrial furnaceStrong adaptability,energy saving and environmental protection,Stable and reliable,Stable and reliable,energy-efficient，structure mainly includes: ventilation system, convection chamber, ventilation system, furnace chamber, Radiation chamber and so on，It is an efficient, energy-saving and environment-friendly metal heating device.。