Introduction to Stick type quenching furnace, forging furnace specifications, model parameters

Stick type quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has the functions of Metal tempering, Metal melting and casting, Energy conservation and environmental protection, Improve production efficiency and Metal forging heating，is a Stick type quenching furnace，The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of ventilation system, convection chamber, ventilation system, recovery of waste heat and combustor。The following is to introduce the Stick type quenching furnace:

1、Brief introduction of Stick type quenching furnace

Stick type quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，has been favored by more and more customers.。

Stick type quenching furnace

2、Introduction of Stick type quenching furnace characteristics

Stick type quenching furnace has the following characteristics

1. Stable and reliable

The Stick type quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the Stick type quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Stick type quenching furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Easy to control

The combustion system and ventilation system of the Stick type quenching furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Stable and reliable

The Stick type quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Stick type quenching furnace

3、Stick type quenching furnace video detail

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Stick type quenching furnace production process and production site, and gain favorable comments and recognition from customers.。

Stick type quenching furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd Widely used in Metal heat treatment, Metal heat treatment, Energy conservation and environmental protection, Metal tempering and Metal melting and casting。

4、Stick type quenching furnace application

Stick type quenching furnaces have the following purposes.

1. Improve production efficiency

The Stick type quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick type quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Stick type quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Stick type quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Stick type quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Stick type quenching furnace

5、Stick type quenching furnace HD picture

Various specifications and models of Stick type quenching furnace are displayed for our customers to visit.。

Stick type quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Stick type quenching furnace application

Stick type quenching furnaces have the following purposes.

1. Metal forging heating

The Stick type quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Stick type quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Stick type quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Stick type quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick type quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Stick type quenching furnace

Stick type quenching furnaceit has the functions of quench, anneal, temper, Casting heating and Forging heating，the main structure includes furnace chamber, Radiation chamber, ventilation system, furnace chamber, recovery of waste heat and so on，is a common Stick type quenching furnace。