What is a Well type bright furnace? Introduction to the advantages and characteristics of forging furnace functions

Well type bright furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is mainly composed of recovery of waste heat, combustor, ventilation system, convection chamber and ventilation system，This productThe structure is novel, special, advanced, reasonable and scientific.，the product looks atmospheric.，is based on One-combustion energy saving is a Well type bright furnace newly developed by One-combustion energy saving。

1、Brief introduction of Well type bright furnace

Well type bright furnaceIt is a forging heating device using gas as fuel.，multifunctional, with functions such as quench, temper, hardening and tempering, heat treatment and temper，It has the functions of Metal tempering, Metal heat treatment, Metal forging heating, Metal melting and casting and Energy conservation and environmental protection，is a common Well type bright furnace，super quality and competitive price。

Well type bright furnace

2、Well type bright furnace application

Well type bright furnaces have the following purposes.

1. Energy conservation and environmental protection

The Well type bright furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Well type bright furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type bright furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Well type bright furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal heat treatment

In addition to forging heating, Well type bright furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Well type bright furnace

3、Well type bright furnace picture

One-combustion energy saving Well type bright furnace manufacturers, a variety of series of Well type bright furnace with high-definition pictures at a glance, showing the product style, for the majority of users to choose at will.。

Well type bright furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of Well type bright furnace characteristics

Well type bright furnace has the following characteristics

1. Stable and reliable

The Well type bright furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the Well type bright furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Well type bright furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Strong adaptability

The Well type bright furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The Well type bright furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Well type bright furnace

5、Well type bright furnace structure composition

The Well type bright furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Well type bright furnace

6、Well type bright furnace use

The purpose of Well type bright furnace is introduced as follows:

1. Energy conservation and environmental protection

The Well type bright furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Well type bright furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Well type bright furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type bright furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Well type bright furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Well type bright furnace

Well type bright furnaceUniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it is widely used in aerospace, war industry, pharmacy, material and machinery。