Introduction to Anchor chain stainless steel annealing furnace, introduction to forging furnace advantages and characteristics

Anchor chain stainless steel annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Easy to control,energy-efficient,Strong adaptability,Easy to maintain,Easy to control，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，can be customized according to user's needs.。The following is to introduce the Anchor chain stainless steel annealing furnace:

1、Brief introduction of Anchor chain stainless steel annealing furnace

Anchor chain stainless steel annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Structure consists of combustor, ventilation system, Radiation chamber, convection chamber, recovery of waste heat and so on，Anchor chain stainless steel annealing furnaceSimple structure and advanced technology.，it has the functions of Forging heating, anneal, quench, Casting heating and heat treatment，is a Anchor chain stainless steel annealing furnace，the product looks beautiful.。

Anchor chain stainless steel annealing furnace

2、Anchor chain stainless steel annealing furnace HD real shot

On-site aerial photography of Anchor chain stainless steel annealing furnace。

Anchor chain stainless steel annealing furnace

As you can see from the live video.，One-combustion energy saving it is widely used in surface treatment, petroleum, shipping, building materials, electron and other industries。

3、Introduction of advantages of Anchor chain stainless steel annealing furnace

Anchor chain stainless steel annealing furnaces have the following advantages.

1. Wide application range

The Anchor chain stainless steel annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Improve product quality

Because the Anchor chain stainless steel annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Efficient combustion

The Anchor chain stainless steel annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Uniform heating

The Anchor chain stainless steel annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Anchor chain stainless steel annealing furnace

4、Anchor chain stainless steel annealing furnace characteristics

The Anchor chain stainless steel annealing furnace features are as follows:

1. Strong adaptability

The Anchor chain stainless steel annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Efficient heating

The Anchor chain stainless steel annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Anchor chain stainless steel annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Anchor chain stainless steel annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Anchor chain stainless steel annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Anchor chain stainless steel annealing furnace

5、Anchor chain stainless steel annealing furnace use

The purpose of Anchor chain stainless steel annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Anchor chain stainless steel annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Anchor chain stainless steel annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Anchor chain stainless steel annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Anchor chain stainless steel annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Anchor chain stainless steel annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Anchor chain stainless steel annealing furnace

6、Anchor chain stainless steel annealing furnace price

The Anchor chain stainless steel annealing furnace price is introduced as follows:

1. Cost input

Cost is a direct and fundamental factor that affects the price of Anchor chain stainless steel annealing furnace. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Anchor chain stainless steel annealing furnace price, low in cost and low in price.

2. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

3. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Anchor chain stainless steel annealing furnace price and service can meet the actual needs of customers.

4. Model size

The price of Anchor chain stainless steel annealing furnace mainly depends on its different specifications. The products with larger specifications will have higher relative products and bring more benefits to customers.

5. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

Anchor chain stainless steel annealing furnace

Anchor chain stainless steel annealing furnaceAdopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，It is an efficient, energy-saving and environment-friendly metal heating device.，multifunctional, with functions such as temper, normalizing, hardening and tempering, Forging heating and hardening and tempering。